Konica minolta bizhub 215 machine trouble service call 3452

It is a generic warm up failure. You need the service call.

Code: C3451 · Description: Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature

PREVIEW
1:49 How to solve error code c3451 in Konica Minolta Bizhub 215 ...
YouTube · Daily new solutions Oct 22, 2020 PREVIEW
6:45 SOLUTION MACHINE SERVICE CALL c3451,c3452,c3751 ...
YouTube · COPIER ZONE Nov 30, 2020 PREVIEW
13:41 SOLUTION MACHINE TROUBLE SERVICE CALL (C3451 ...
YouTube · COPIER ZONE Dec 20, 2020 PREVIEW
5:21 COPIER MINOLTA Bizhub 195 215 235 TROUBLE C3451 ...
YouTube · Tomasz Jemio?ek Nov 22, 2018 View all

Konica-Minolta bizhub 195 - Error Code - PrintCopy .info

https://printcopy.info > model=bizhub 195 > code=C3451
Code: C3451; Description: Warming-up failure - The thermistor/1 (TH1) detected that the temperature of the surface of the fusing roller did not reach the ...

• 
  

  Konica-Minolta bizhub 350 - C3451 - PrintCopy .info

  https://printcopy.info > model=bizhub 350 > code=C3451
  Konica-Minolta bizhub 350 · Code: C3451 · Description: Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature ...

Turn ON the power switch with the Stop/Reset key held down. code is for the fuser the hot part that fuse the toner to the paper. Replace may be needed.

If you wish to get some details; check the site linked here. Pull up older posts......
http://electro-medical.blogspot.com/

Sir/Mam
MINE YOU THAT IF THIS PROCEDURE DOES NOT WORK DO NOT RESET GAIN YOU ARE DEALING WITH THE FUSER IT CAN CATCH ON FIRE THAT WILL RUIN A PERFECTLY GOOD DAY!!!!!!!! have tech come out replace the fuser
1. Turn OFF the Main Power Switch.
2. Turn Main Power Switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the Main Power Switch, turn it on again more than 10 seconds after
and check if the machine starts correctly.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

machin trouble service call (c3451)

Press. Heater Trouble, check the Fusing Unit for correct installation (whether it is secured in position). For service manual visit: http://fixmfp.com/index.php?route=product/product&path=60_64&product_id=122

Error Name:-
machine trouble service call c03ff

http://www.copytechnet.com/forums/konica-minolta/10478-bizhub-c351-error-c-3452-a.html


Fuser problem

Restart the machine.If code removes then its OK, otherwise press the utility/counter button and restart the machine.Don not leave the button.Keep the button pressed.Trouble reset will appear on screen hit it and restart the machine.

your problem maybe caused by a thermistor near the pressure roll in the fusing unit (the red roll).

Try the follow procedure and if it doesn't fix call minolta service.

1. Turn OFF the Main Power Switch.
2. Turn Main Power Switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the Main Power Switch, turn it on again more than 10 seconds after
and check if the machine starts correctly.