SOURCE: TEAC SRL100 Set clock
The "set time" button on my SR-L100 is located inside the CD compartment. To set the time the unit needs to be in the standby mode. Press and hold the set time button until the time blinks, then use the tuning/clock adj. dial to set it. Hope this helps! Ted
SOURCE: I cannot set the clock on my Teac MC-DX50i
I've found that I can only set the clock using the remote. Press and hold the 'time set' button on the remote, and using the forward and back buttons on either side of the play button, you can change your clock to a 12 hr or 24 hr time setting. Once that is set, press the 'time set' button and that will switch you to the hour, and using the same forward and back buttons, set that. Repeat the process to set the minutes. Press the 'time set' button again to exit out of if, and you're all set!
SOURCE: I cannot set the clock on my Teac MC-DX50i
put the system in standby then use your forward and revese buttons to set the time.
SOURCE: TEAC MC-D78 stopped reading discs,everything else
sir try to clean the lens in disc mechanism maybe the lens got dirt.. try to visit this link to access operating manual for your player.. its free to register.... tnx..
http://www.nodevice.com/manual/newmans/teac/MC-D78pdf/get50635.html
if you think i help you plzz rate me tnxx... goodluck
Testimonial: "QUICK FEEDBACK,MUCH APPRECIATED BUT I THINK THE PROBLEM IS DEEPER THAN A LENS CLEAN,POSSIBLY FAILED LASER PICK -UP BUT THANKS FOR YOUR INPUT."
If the unit is on, press the STANDBY/ON switch to turn it standby
2 Press and hold the TIME SET button for more than 3 seconds and release it when "12H" or "24H" appears on the display. "12" or "24" blinks. If you want to change the hour mode, press the .or/ button.
< If you leave the unit idle for 7 seconds, the time setting mode will be cancelled.
3 Press the TIME SET button once more. The "hour" value blinks.
4 Press the SKIP button (.//) to set the current hour.
5 Press the TIME SET button. The "minute" value blinks.
6 Press the SKIP button (.//) to set the current minute.
7 Press the TIME SET button. The clock starts.
167 views
Usually answered in minutes!
×