Question about GE Lands Phones

Open Question

My ge 27958 will not playback msg.

Top 4 butto s on the phone does not work after power was off. Buttons are annku. Er, answerer, me o, play/stop. Everythi g else works. Msgs get recorded but wo t playback.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: Will not playback tapes

a sony cleaning cassette may clear the gunk from your friend ' s possibly ? bad tapes ( do not rewind it - or the gunk will be redeposited ) ; if still no video , get an estimate to have your heads and guides cleaned . . . professionally ;

Posted on Aug 02, 2007

Ad
magic seadog
  • 38 Answers

SOURCE: Sony Handycam CCD-TRV37 8mm Analog... 2 Problems, maybe more unknown at this time:

This does require disassembly to remedy the problem. There are various possible fixes. The most prevelant I have seen is cold solder connections of the board connector for the fpc cable from the top operation switch block ass'y. All you need is someone who can handle this task, like a professional. The controls that you are experiencing problems with are all linked with one cable and connector. One bad solder joint can cause serveral operation faults. Good Luck, magic seadog

Posted on Aug 19, 2007

  • 169 Answers

SOURCE: My Touch Screen Buttons

the flexwire is the problem of your camera and if all wiring be cut the next problem is the lcd monitor would not turn on...go to a service center for replacing or repairing the flexwire...

Posted on Sep 01, 2007

  • 1 Answer

SOURCE: GE Telephone answering machine will not work

298976e2-a owners manual,
i have same problem,
sorry if my english not the best.
i "paste and copy"
We have the answering machine set to 4 rings. When people call, the machine picks up on the 4th ring, it beeps, then cuts off. No recorded message. No message is recorded, the call is disconnected. What do we do?
send me email.
samspicuglia@rogers.com>>>Canada

Posted on Jul 03, 2008

  • 1 Answer

SOURCE: kxa144azt cordless phone answering machine problem

push int then# this is the menu for the answer machain um 00000 is the security code used to reset or reassign the hand pice

Posted on Mar 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My quick play buttons do not function properly ! example - The mute, volume, wireless, skip track play/pause and stop buttons do not work at all ! I tried installing an update but then my music didnt...


HP Pavilion DV6-1359WM, has a volume control touch pad area located at the top. It's not a driver issue or a setting. This is how you fix it. It worked for me and for some other people....

1. Shut down your laptop.
2. Unplug the power.
3. Remove the battery.
4. Push and hold down the power button for 30 seconds.
5. Reinstall the battery.
6. Plug power back in.
7. Boot

Enjoy :) brought to you by high DanK Inc.

Nov 06, 2010 | Microsoft HP Pavilion DV6276US Notebook PC

1 Answer

I want to retrieve my msgs remotely. The * 1234 doesn't seem to work. thanks


1. call your telephone number.
2. during greeting you press # and enter your pin
3. answering machine says current time and number of messages, then to play stored messages press# then 2.
4. for help press # then zero.

the * is not #. Use the # key before pin number

Sep 10, 2010 | Uniden Cordless Phone exai398i

1 Answer

Problems for Refrig. Kenmore Elite


The Er DH error code indicates the temperature sensor on the evaporator coil did not reach 50 degrees within one hour.
This would indicate the control board did put the refrigerator through a defrost cycle.

This problem could be caused by a defective relay on the control board, a defective defrost heater, a broken wire to the heater, or a stopped up drain on the defrost pan causing ice to form on the evaporator coil.

Before replacing the control board, someone should remove the food from the freezer, remove the freezer drawer, and remove the evaporator cover to expose the evaporator coil, heater, and defrost sensor.
The voltage to the defrost heater should be 120 volts ac.
The defrost heater is part of the evaporator coil and is not replaceable as a separate part.

You can test the operation of the defrost system by pressing "Ultra Ice" and "colder freezer temp" for 3 seconds.
The first time you press and hold the buttons the board will test the compressor, fan, and open the damper.

All displays should be on.


The second time you press and hold the buttons the board will test the compressor, fan, and close the damper.

The third time you press and hold the buttons, the board will turn the compressor and fan off and turn the defrost heater on for around 25 minutes. This would let you know if the defrost system is working.


http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 03, 2010 | Kenmore 73502 / 73504 / 73509 Bottom...

1 Answer

My touch screen is unresponsive [LG glimmer]


I have this all the time: 1. Inbox/ sent msgs are 2 full - so delete msgs 2. remove the battery out & clean sim card 3. If that doesnt work get a new simcard 4. if else fails- get a new phone

Jul 13, 2009 | HTC Touch Cellular Phone

2 Answers

I have a NOKIA N-72 cell phone and its phone memory is full it was showing 19MB memory in use and no free space available.. i started deleting msgs from it.. i selected some around 175 msgs to delete at a...


formate your cellphone once..through the step shown below


1. Switch off the phone.
2. Hold down the following three buttons: Green (call answer button, * button, and ‘3′ button.
3. While holding these buttons, press the power button and switch on the phone.
4. When the message ‘Formatting’ appears on the screen, release all of the buttons.

Jul 04, 2009 | Nokia N72 Cellular Phone

1 Answer

Motoroal pebl u6 sms not working and phone hangs up


you go to msgs seeting and change ur msga xenter nomber as ur sim msgs center number

Jan 01, 2009 | Motorola Mobility PEBL U6 Cellular Phone

1 Answer

Answer to Clarification request


no probs..here is the way,start from the default screen
press the menu(centre button of the 4 way pad)--two down presses on the 4 way pad--centre butto-- again centre button--upper left button--three presses of down button --centre button--centre button again--one click of down button--one click of down-centre button--top left button
that should move all from SIM to Phone
please get back if any help/clarification

Nov 27, 2008 | Nokia 6030 Cellular Phone

2 Answers

Error number 1700 canon s9000 printer


knowing printer manufacturers I doubt they even have a sensor to detect that its full at all, they probably based on something crumby like print count. here are some instructions to reset the waste ink tank, the instructions vary so try them until one does the job :
Waste Ink Tank Reset

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice, then release all buttons
5: When the indicator lights steady, press RESUME three or four times. The indicator should be orange.
6: Press Power to set data



1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.



1. power off Printer
2. Push and hold resume button and push power button
3. Hold Power button and release Resume button
4. Push Resume button twice ( 2x ), and now release resume button and power button
5. Green light will blinking and stop.
6. When green light on, push resume button 4 x
7. Push Power button and printer will off, if that isn't off, push power butto again until print off position.

Aug 20, 2008 | Office Equipment & Supplies

1 Answer

Do U Know Wux Wrong. . .


special tool for taken sliders apart but sounds like the ribon for bottom end to top end might have came apart this is a dealer fix simple for them hard for the public

May 13, 2008 | Nokia N95 Cellular Phone

1 Answer

Buttons wont work and Phone shuts off randomly


I need more info, like is the phone water damaged, did you drop it at all?

Aug 06, 2007 | Motorola Mobility L6 Cellular Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

martin hogg

Level 2 Expert

157 Answers

Cindy Wells

Level 3 Expert

6001 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...