Question about Casio PX-830 BK Privia

Open Question

Privia PX-830 playing everything an octave too high. How do I re-set? Thank you.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 133 Answers

SOURCE: Turned on the Privia PX-575R and sound distorted,

You should probably check the bender controller and the master volume potentiometer, they might be dirty / oxydized, in such case, you need to either disassemble and clean them or replace them.

Also check for bad solder contacts on wires, connector pins and any of the components (e.g. voltage regulators, capacitors and/or other components).

Check all connectors for any dirt / oxydation on the pins and clean them if necessary.

Also check the main power switch (dirty contacts may result in erratic behaviour of the unit), and, if we're talking onboard speakers, see if the speaker protection mesh is somewhat loose, it may vibrate and cause the speakers to have dirty / distorted sound (you need to fix the mesh firmly in place to stop it from vibrating).

It could alse be a problem elsewhere in the unit (a bad resistor or capacitor, possibly some other component), these are just some of the things that may cause the unit to have dirty sound.

Hope you can make it sound well again.

regards

3rq8 (Triarcuate)

Posted on Aug 02, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i do the reset factory for a piano Casio Privia PX-120?? It have the tone/settings button but not the function button. anyone know?


You don't need to reset factory.
You just need to change the setting of LOCAL CONTROL.
Lets start :::
While holding TONE / SETTING button,press key D#7 at 7th octave (highest octave on the right hand). Then release. That's all.
Then the sound must be heard..



25557808-tdcpi2jrd5dx0fpyx5gf2f1d-3-0.jpg

Mar 12, 2015 | Casio PX120 Privia KEy ESSENTIALS BUNDLE

1 Answer

I connect the piano to midi and them the speakers stopped sounding, the phones plug too. how can i do the reset factory for the privia px 120?? thanks!


You don't need to reset factory.
You just need to change the setting of LOCAL CONTROL.
Lets start :::
While holding TONE / SETTING button,press key D#7 at 7th octave (highest octave on the right hand). Then release. That's all.
Then the sound must be heard..


25549846-tdcpi2jrd5dx0fpyx5gf2f1d-3-0.jpg

Mar 11, 2015 | Casio PX120 Privia KEy ESSENTIALS BUNDLE

1 Answer

Privia 830 factory reset


TRY this;-
1. Turn off the digital piano
2. While holding down both the (TONE) and (FUNCTION) buttons, press the (POWER) button

Jan 11, 2014 | Casio PX-830 BK Privia

1 Answer

Today I received my new Privia px830 and three keys works as an interruptor: play notes at full intensity. Are sensors cracked?


The sensors are rubber, and don't usually crack. Most of the time they are dirty and can be cleaned with rubbing alcohol and Q-tips VERY carefully. Also be careful of the ribbon wires inside the keyboard. The keys should just snap in and out. I cleaned mine a little while ago, and now it works perfectly.

Jan 06, 2013 | Casio PX-830 BK Privia

1 Answer

How to fix loud key on Privia PX-830


I just fixed mine, it was making the loud sounds and had seemed to have lost the sensitivity. Take out all the screws on the outside, then the sides can come off. That gives access to the inside where you can take out a few more screws (easily seen) and open it all up. The keys themselves just snap in, so two small screwdrivers or strong fingernails can pop them back out. Clean the rubber contacts (they look like little sockets) with Q-tips and rubbing alcohol, then replace the keys. If you take out the white keys of an octave first, then the black keys (keeping them in order) it is a lot easier.

Jun 18, 2012 | Casio PX-830 BK Privia

1 Answer

My casio privia px830 pedal doesn't sustain enough,


It could be that the electronics of the pedal are dirty, or that dirt has collected under it causing it to not depress all the way. Try taking it apart and cleaning it with a Q-tip and rubbing alcohol. Be very careful of any wires or delicate articles.

Dec 06, 2011 | Casio PX-830 BK Privia

2 Answers

I have a Casio Privia Px330. On a split keyboard how do I alter the right hand tone?


On page E11 of your manual... see the picture with two voices, one for the T and one for R... select them there.

Your manual can be downloaded here: http://support.casio.com/pdf/008/PX330E1A_web.pdf

You probably cannot "change the tone" of the two voices if they are the same voice. You should be able to transpose to different octave however.

Feb 03, 2011 | Casio Privia Px330 Px-330 88 Key Digital...

1 Answer

Hi, the sustain pedal on my Casio PX-830 has a constant squeak now after 6 months, any ideas on a fix for this? Thanks.


clean with q-tips and rubbing alcohol around the moving parts, let dry 5 min, and some graphite lubricant may help. graphite is a slippery dry powder good for reducing friction on moving parts. comes in a little tube, normally sold buy the key making dept at any store

Dec 21, 2010 | Casio PX-830 BK Privia

Not finding what you are looking for?
Casio PX-830 BK Privia Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Ben Armstrong

Level 2 Expert

360 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Casio Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...