I have a Husqvarna Jade 20 I am unable to put bobbin winder spindle back into sewing machine , my bobbin got stuck after winding to tight . How to get back in ?

Raise the foot! Hours of frustration and this fixed the triple beep when trying to wind the bobbin.

Hello Kitty
The 'tiny black semi-circle' sounds like the bobbin winder or a part of it. That 'little' part has to go back onto the bobbin winder, or else the bobbins will over-fill. However, if the bobbin winder (the 'thing' that holds the bobbin in place while winding) is pushed toward the bobbin spindle ... pull it back and the machine will 'let' you sew. But still no winding bobbins. Refer to pages 10 and 11 of your manual, or download it for free from:
http://manuals.husqvarnaviking.com/
The part that came off, should be installed to factory specifications which a qualified technician will be able to instal.
Hopefully this will let you finish what you started.

Please give me a thumbs up if this is helpful.
Sewingirl/

Perhaps a manual would be helpful:

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0ahUKEwjgksb12OPSAhVQyGMKHa45ARMQFggiMAE&url=http%3A%2F%2Fwww.husqvarnaviking.com%2FSiteFiles%2FClientSite%2Fc0%2Fc069c236-d0ee-4d49-8dd6-5b1e97894010.pdf&usg=AFQjCNEjkSe8T8eCl7KH75CVnBJw_tVmLQ&cad=rja

Husqvarna 150 classica manual Google Search

Husqvarna Classica 90 User Manual Removing Bobbin Case Bobbin Winding

Bobbin winder spindle will not spin - YouTube

? 1:24
https://www.youtube.com/watch?v=Fh52_ndkSKs
Jun 12, 2013 - Uploaded by djc472
Thread caught between spindle shaft shoulder and bearing. ... Sewing machine won't pick up bobbin thread ...

Why won't the bobbin winder work on my Kenmore sewing ...

www.shopyourway.com > Manage My Life > Questions

The bobbin winder doesn't spin and I can't wind the bobbin. ... What will release thebobbin winder that is stuck to the right on my Kenmore sewing machine model 385.17826690? Why won't my bobbin holder thread to the top on my Sears Kenmore sewing machine model 385.17928?

Sewing machine bobbin winder won't turn ' ShopYourWay

I do not know the Husqvarna Viking 630. However, I have used the Viking 6690 and it has a similar on-the-side bobbin winding routine. I suspect that you failed to move the bobbin winding mechanism back into the sewing position. Look closely at the area around the bobbin winding spindle. It looks like there is a lever below the spindle. Does this need to be moved or rotated? Double check the steps in the manual and check that you did the opposite steps of preparing to wind the bobbin.

On the 6690, you pull out a knob after removing the bobbin. (You push this piece in and put the bobbin onto the now exposed spindle for winding.)

I hope this helps.

Cindy Wells

The bobbin is probably cracked. They get that way when bobbins are wound in correctly, or to tight. Just break it off and get new bobbins. Just make sure your theading it correctly when winding bobbins.

Is this a Designer 1 or a #1? There is no moving lever on the pin of a Deigner 1,they are fixed. If it's a #1, use sewing machine oil or Triflow. NEVER use 3 in 1 oil. It will gum up and cause problems later on.

prise it of its the only way

i have a husqvarna rose, i has the same problem when i started using my machine. i was suggested to not wind the bobbin so fast. the reason it gets stuck is because the thread is so tight on the bobbin it actually makes the bobbin a tiny bit smaller, making it hard to get off again. if you dont wind it so fast, it doesn't get so tight.

kylee

What model are you talking about? For my older Husqvarna machine you had to pull the bobbin winding bit out to wind the bobbin, then push it back in when you were done.