In power save mode

In dell system when i turn on the system then it says in power save mode press any key from keyboard and move mouse,when i press the nothing happens,system is not turning on

4 more comments
Anonymous Dec 16, 2007

power save mode
power save mode
motocb500ul Dec 17, 2007

The computer was in powersave mode, I moved the mouse and the screen flashed and the monitor went black. The monitor power button flashes green and will not come on anymore. What's wrong with it?
jiquita Sep 10, 2008

used to turn on for a second, now i does not do it anymore.
Anonymous Nov 14, 2008

When I turn on the compter the monitor will not start normally like it should, I had to manually tyurn it on just to get the message that it is on power save mode and to hit any key on keyboard or move mouse to start. I tried and followed the instructions and nothing happened, what should I do next?
Anonymous Nov 17, 2008

My Dell monitor says it is in power save mode and that I should press a key or move my mouse to turn it on. When i do this nothing happens.
Anonymous Mar 24, 2014

I want to turn off the power saving mode on my Dell V305 printer

2 Answers

Anonymous

Contributor 1 Answer
Posted on Apr 17, 2009

Anonymous

Contributor

Joined: Apr 17, 2009

Answers

Questions

Helped

628

Points

Check that the cable has not come out of the back of your pc or monitor

Neil Gibbs

Contributor 5 Answers
Posted on Dec 06, 2007

Neil Gibbs

Contributor

Joined: Dec 06, 2007

Answers

Questions

Helped

3558

Points

Try hitting the space bar on the keyboard. Does the mouse work normally?

1 Related Answer

Curtis Richner

461 Answers
Posted on Nov 17, 2008

SOURCE: In power save mode

The monitor is not receiving signal from the computer. Is the power light on on the computer? If so - press and hold power button on computer until the power light goes off, then press again to restart. If the computer starts and you still have no picture it is most likely a video card or motherboard problem.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Dropped keyboard. Now display on monitor says 1. Analog input in power save mode - press any key or move mouse to turn on. I have done both, neither works. I have turned off system and I see it rebooting...

Hello,

the message Analog input in power save mode means that your monitor is not getting a signal from your computer.

Maybe you moved the video cable while reconnecting your keyboard? check both ends of your video cable.

If you have a DVI cable, then your monitor has to be switched to digial input.

I hope this helps.

Read full answer

Nov 10, 2017 • Dell UltraSharp 1708FP 17" LCD Flat Panel...

0helpful

1answer

I have a E156FP LCD Monitor. When I turn on my computer, it will show the initial Dell Screen and then the screen goes black. The green power light turns orange. If I push either of the (+) or (-)...

The monitor has failed, it is almost always cheaper to replace it than fix it.

Read full answer

Apr 05, 2017 • Dell E156FP 15" LCD Monitor

0helpful

2answers

How to unlock the key pad on a dell latitude D600 laptop

Hi. Please do troubleshooting steps below:

1. Check to be sure your "Number Lock" or "Function Lock" keys aren't lit. These can lock out certain parts of your keyboard. If either of these is lit, press them to unlock the locked portion of your keyboard. These can be found at the top right on a laptop and between the number pad and main keys on a desktop keyboard.

2. Save all open programs using your mouse. Use your mouse to restart your computer. This will only work if your computer isn't frozen. If your mouse doesn't move, press the power button on your Dell until the computer turns off. Press it again to restart. If the issue was lack of memory or a locked program, this will unlock your keyboard. Continue to Step 3 if the keyboard is still locked.

3. Shut down your computer using your mouse or power button. Don't restart. Unplug your Dell.

4. Remove the battery if you're using a laptop by turning the laptop over and sliding the battery release latch. Slide the battery out and replace after one minute.

Have a good one!

Step 2 Save all open programs using your mouse. Use your mouse to restart your computer. This will only work if your computer isn't frozen. If your mouse doesn't move, press the power button on your Dell until the computer turns off. Press it again to restart. If the issue was lack of memory or a locked program, this will unlock your keyboard. Continue to Step 3 if the keyboard is still locked.

Step 3 Shut down your computer using your mouse or power button. Don't restart. Unplug your Dell.

Step 4 Remove the battery if you're using a laptop by turning the laptop over and sliding the battery release latch. Slide the battery out and replace after one minute.

Read full answer

Jul 25, 2010 • Dell Latitude D600 Notebook

0helpful

1answer

LX 300 Keyboard and Mouse: mouse works but keyboard doesn't...

Hi,

You can hit Window+U at the Welcome Screen, this will turn on the on-screen keyboard. Reinstalling the drivers should fix the problem

............................................................
Also to enter save mode, when the system powers up hold down F8 Key. Use your arrow keys to move to "Safe Mode" and press Enter key.

Please post your feedback.

Read full answer

May 18, 2010 • Logitech LX 300 Keyboard/Mouse

0helpful

2answers

How do I get my computer off power save mode?

open control panel choose power options and you can turn it off

Read full answer

Jan 12, 2010 • Dell E173FP 17" LCD Monitor

0helpful

1answer

My monitor shuts down after one second.

Dell monitors automatically go into power-save mode after a preset amount of time when the computer is inactive. The Dell monitor will go completely black, instead of showing a screensaver. This doesn't mean that your Dell computer

has shut down. Instead, this allows your monitor to essentially turn off until it's needed again. You can change how long it is before the Dell monitor goes into power-save mode by changing your display settings.

Step 1 Press any key on your keyboard or move your mouse. Either will turn off power-save mode. Alternately, you can press the power button on your Dell computer tower or laptop.
Step 2 Press any key a second time if the monitor goes from power-save to stand-by mode. Stand-by mode allows the screensaver to appear.
Step 3 Enter your user name and password into the login prompt if your computer requires a login. Press "Enter" to begin using your Dell computer.
Step 4 Change the display settings on your Dell monitor to prevent your monitor from going into power-save mode prematurely. Right-click anywhere on your desktop and choose "Properties." Click the "Screensaver" tab and press "Power." Beside "Turn off Monitor," choose a time amount from the drop-down list and press "Apply."

Read full answer

Nov 13, 2009 • Dell Dimension 3100 PC Desktop

0helpful

1answer

Inspiron 530S Power Save Mode

VIRUS

Read full answer

May 27, 2009 • Dell Inspiron 530 Desktop Computer

0helpful

1answer

Dell E173FP stuck in power save mode

Good morning! kindly try to review/check the operations manual of your monitor as there might be proper set-up settings / compatibility requirements to a certain PC. best regards

Read full answer

May 09, 2009 • Dell Dimension E520 PC Desktop

1helpful

1answer