Artisan mixers do not "switch". The food processor gets power from the power take off (PTO) shaft under the cap on the front of the mixer and the mixer gets power through the gear box. Both get motor power all the time all the time.
To "switch", take the bowl and beaters off the Artisan. Remove the PTO cap and install the food processor. Tape up your sleeves so the mixer drive does not grab your blouse. Turn on the mixer (as usual), adjust the speed (as usual), and process away.
SOURCE: Need bowl and mixer attachments for Kitchen Aid Artisan Mixer
The Kitchen Collection (http://www.kitchencollection.com/Temp_Store_Locator.cfm) which has stores throughout the nation and an Internet storefront carries all of the pieces and parts. Unfortunately, the bowls for an Artisan run $50 and each attachment is about $15, so the price is going to add up quickly.
Another cheaper option is to try eBay. Individual parts are often available there.
SOURCE: The mixer attachment is stuck on my Artisan stand
Turn it back and forth, may be jamed in locking mechanism/slot.
SOURCE: does the chef mixer km336 have a food processor
Does it have what you would normally consider a food processor? No.
SOURCE: I need a manual for a K-11 model Kitchenetics
good day,
hope this link below will solve your problem.
kitchen
SOURCE: DSM800 (DeLonghi branded Kenwood mixer) - I need
Yes the KW800 Kenwood attachments will work.
278 views
Usually answered in minutes!
×