Speedstream 5100 Do I need an install disc if I want to use this modem on my AT&T DSL service? It was my son's and he does not remember if it came with one. My DSL will not be activated until Fri. the 30th of Nov.. The light right now is blinking red on the DSL led. When it turns green on Friday, what then?

FOR AOL Instructions see the first question in

http://www.smallbusinesscomputing.com/we...

As far as configuring the router try

http://www.dslreports.com/faq/efficient/7_Misc._Questions

or

www.waymark.net/tech_support/DSL/SBC/5260.pdf

or

http://whirlpool.net.au/index.cfm?a=h_view&model_id=112

FROM THE SECOND LINK --

Installation Requirements
To install the 5260 ADSL LAN modem, you will need the following:
• A computer equipped with an Ethernet network interface card (NIC) or
an Ethernet hub
• A DSL-ready telephone line installed at the desired installation site
Package Contents
Your package should contain the items listed below. If anything is missing
or damaged, please contact the dealer from whom the equipment was
purchased.
• 5260 LAN modem unit
• Power supply
• One RJ11 unshielded twisted pair (UTP) cable (for the DSL connection)
• One RJ45 UTP straight-through cable (for direct connection to a PC
with a NIC installed)
• Installation Guide, Safety and Certification booklet, and Release Notes
(if applicable).
.