Wife opened door quickly at end of baking session and door fell open quickly to the completely horizontal position. The right hand hinge appears to be damaged; the roller has become disengaged and the spring has disappeared back up inside the door.
Now when the door is closed it appears to not close sufficiently at the top against the seal, it sticks out about a quarter inch (or 6mm here in Australia) I suspect the the right hand hinge has been partially dis-engaged but I cannot dis-engage the entire door to then try for a refit.
Any ideas would be very welcome.
The oven is a Kleenmaid Freestanding FEC500x/w and is truly a beautiful little unit.
Many thanks in advance of reply.
Kind regards
Michael
The door hinge is probaly broken or could just be the spring. Open the door to the 45 degree position (halfway) and pull on the door. It should come off the hinge assembly. Slide out the oven a little to access the screws for the hinge to see what is broken or wore out.
920 views
Usually answered in minutes!
×