Question about Photography

1 Answer

When I plug in my DPF710 digital frame all I get is a white screen. Pushed other buttons, no response.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Photography Master
  • 6,104 Answers

Plug it into what ?

Posted on Jun 20, 2019

Testimonial: "The power cord from the outlet to the frame. The frame is getting power, but will not move from a white screen."

  • Tony Parsons
    Tony Parsons Jun 21, 2019

    Have you tried looking in the manual ?

×

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 563 Answers

SOURCE: Vizio VX32L The screen goes white,no response from buttons

G'Day!

Unfortunately, what you're describing is a repair issue. You won't be able to address the problem with troubleshooting. There is a part inside the TV that needs to be replaced. If you're under warranty, this will cost you nothing. If you're not under warranty the cost will likely be a minimum of $200 parts and labor. However, be warned that the cost could be considerably higher.


I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Posted on Jul 28, 2009

YourZEN

YourZEN

  • 820 Answers

SOURCE: blank white screen

Hello,

Did you try gently pushing the tiny RESET, with a narrow pointed object like a paperclip on the back side ?

01a0fc5.jpg RESET pin hole back side ( 8 ) .

Manual for the MP610 in pdf format:
http://www.cobyusa.com/files/manuals/MP610_MN.pdf

Posted on Jun 01, 2010

darealdoomer

  • 3 Answers

SOURCE: GE photo phone. Phone works. Photo frame was blank. 0 pictures

Remove the battery, unplug the phone, wait 48 hours. That might fix it. Or just get a new phone, these are poor.

Posted on Apr 15, 2011

john_cross

  • 6277 Answers

SOURCE: Machine stopped at rince cycle.

Hi from retired Englishman in SW France,
(no promises but try this!)
I would gently suggest as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to spin or release the door lock if there is any water still left inside.
Here are my complete guidance notes for checking both the drain motor filter and the drain motor ;-0)
-------------------------------------

If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and most are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play!

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. Using something suitable like a glove see if it is easy to briefly slow the motor down. If it is easy then the motor is malfunctioning!

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Posted on Apr 29, 2011

ethanbonet

Ethan Bonet

  • 44 Answers

SOURCE: My 3g screen is not responsive after changing the screen/digitizer/frame.

I would verify that all of the proper connections are in place. Here's a video for clarification:http://www.youtube.com/watch?v=4mboB8p-sdw

Posted on Dec 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

T mobile touch pro 2 doesn't power on.


Take the battery completely out of it and let it sit for about 5 minutes. Then install the battery and see if it will turn on normally.
Don

Apr 06, 2012 | HTC Touch Dual Slider Smartphone

1 Answer

Picture is blinking and going to a white screen


Mine did this before it died. It would blink, show the eye and then a white screen that says it's loading something, when I kept the power button pressed down. It was the only way it showed it was still alive. I then bought a new adaptor from RadioShack with the same voltage and amp... and it just died. The adaptor got very hot and I now think it's the frame itself. Unless someone knows what to do inside this frame with pictures, I'd suggest taking it to your local, non-store chain, mom-and pop, electronic repair store...

Nov 21, 2010 | SmartParts SP15MW (092566981886) Digital...

1 Answer

Iiyama prolite e1902wsv white screen , no picture


From time to time, I've the same white screen problem with my IIYAMA E1902WSV.

I can resolve that issue with a reset to factory settings.
1- Turn ON power (blue led)
2- Push on the MENU button and keep the button pushed while
pulling out the power cord.
3- Plug the power cord back while keeping the MENU button
pushed.

You should see the picture again.

Oct 18, 2010 | iiyama ProLite E481S-B 19" LCD Monitor

1 Answer

Blank white screen


Hello,

Did you try gently pushing the tiny RESET, with a narrow pointed object like a paperclip on the back side ?

01a0fc5.jpg RESET pin hole back side ( 8 ) .

Manual for the MP610 in pdf format:
http://www.cobyusa.com/files/manuals/MP610_MN.pdf

Jun 01, 2010 | Coby MP-610 MP3 Player

1 Answer

I cannot get my sp104wm to get past a blank green screen.


If you have the opportunity take it back, quick....these units have been problems for a lot of people and with little if any support from the manufacturer.

Apr 05, 2010 | SmartParts SP104MW Digital Picture Frame

1 Answer

Camera screen pushed in


You have damaged/disconnnected the video data ribbon replace if needed

Dec 31, 2009 | Kodak EasyShare V803 Digital Camera

1 Answer

GE photo phone. Phone works. Photo frame was blank. 0 pictures


Remove the battery, unplug the phone, wait 48 hours. That might fix it. Or just get a new phone, these are poor.

Oct 25, 2009 | General Electric 27956FE1 Cordless Phone

1 Answer

New GoGear Vibe will not turn on after first charge!


This is not a solution to fixing the mp3 player, but I no longer need assistance, I returned the product for a refund.


Jun 04, 2009 | Philips GOGEAR SA6045 MP3 Player

Not finding what you are looking for?
Photography Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Photography Experts

Ric Donato

Level 2 Expert

226 Answers

Ekse

Level 3 Expert

13434 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...