Question about Pride Mobility Products Casual CL20KD Lift Chair Chestnut

1 Answer

My pride IV scooter will not start I get a click

My pride legend IV scooter will not start, I get a click then the warning light flashes 8 times

Posted by on

  • Anonymous Mar 24, 2014

    green light flashes 7 times scooter will not move

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 175 Answers

An 8-flash code indicates that the controller has shot craps. The controller is located under the shroud beneath the seat by the batteries and it controls all of the power and automatic functions of the scooter. They are damaged most often by water infiltration like running through deep puddles, etc. or by over-amping the scooter by driving it through unstable terrain like sand, mud, wet grass. There's no fix for it but a replacement and it's pricey...several hundred dollars.

Posted on Aug 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scooter is saying error code 8 which is motor does anyone know what this could be please?


Pride Mobility Products Victory 9 Scooter 4 Wheel Error code

www.fixya.com > ... > Pride Mobility Products Victory 9 Scooter 4 Wheel
Pride Mobility Products Victory 9 Scooter 4 Wheel, error code related issues. ... Question about Thermometer Mobility Scooters ... error code is 8 Error code 8 means an internal controller error or problem and requires replacement of the controller. ... Theysay there is no listing for code 9 I have replaced the batteries,checked .
Basic Troubleshooting Instructions - Pride Mobility Productswww.pridemobility.com > Resource CenterPride MobilityScooters. INFINFB2040 Sonic Troubleshooting ... Chargers. INFINFB2586 Charger Indicator Codes ... Disclosure Statement Pursuant to Cal. Civ. Code 1714.43(a)[PDF]Legend Owner's Manual - Pride Mobility Products

Nov 28, 2015 | Pride Health & Beauty

1 Answer

Why won't my pride legend start?


The legend has a Curtis controller. The flash codes you provided points the problem to a faulty throttle pot. If a new throttle does not fix the issue, then your problem is the controller itself.

Sep 03, 2014 | Pride New Mobility Legend 4 Wheel Scooter

1 Answer

I have a 3wh. 'LR'model Pride scooter for


I'd be looking at the motor controller first. Since you don't have any flashing leds to indicate a problem, perhaps the brushes on the motors need replacing.

Jul 28, 2017 | Pride Mobility Products Pride Mobility...

1 Answer

I have a legend pride four wheel electric scooter. It does not run anymore. We checked the batteries and they are good and we charged them. We also went through all of the wiring and made sure the...


Hi. Is the machine display any fault codes, ( flashing battery light)? Is the free-wheel lever in the correct place, Move it in and back again and try it. It is possible that you have a stuck brush in the motor. Get a multi meter and check the resistance through the motor. Check that the brake unit is releasing properly.
If one of the battery lights is flashing, count the flashes and let us know what the pattern is, and we can tell you what it means. Good luck. Neil.

May 09, 2010 | Pride Mobility Products Pride Legend XL -...

1 Answer

Scooter just stops light flashes 8times


hi, 8 flashes mean there is a issue with the motor according to pride, now you need to check the motor connections back to the motor controller, have you check the brushes to make sure they are not sticking inside the motor,

sometimes eight flashes can mean that the speed pot has moved slightly so it in the wrong position when you turn it on, experiment by pushing in the throttle lever and holding it there now turn on it on,

if this sort the problem , undo the throttle lever and relocate so it in the right position hwne you first turn it on.

Regards
gewiz.co.uk

Nov 08, 2009 | Pride New Mobility Legend 4 Wheel Scooter

1 Answer

Cuts out light flashs 8 times


hi , according to the manual, the motor is disconnected, so check the wiring from the controller to the motor or backwards makesure there are good connections.

http://www.pridemobility.com/pdf/owners_manuals/US_Scooter/US_Legend02_om.pdf
Page 21.

Please let me know how you get on.

Regards
GeWiz.

Nov 08, 2009 | Pride New Mobility Legend 4 Wheel Scooter

1 Answer

Pride Legend scooter won't hold charge


check the wiring from the batteries as a wire could have come loose.

Regards
GeWiz

Sep 23, 2009 | Pride New Mobility Legend 4 Wheel Scooter

1 Answer

I have mislaid my Legend Classic XL8 manual & wish to know all the flash error codes


This page has a link to the users manual near the bottom:

http://www.cheapest-scooters.co.uk/8mph/pride-legend-classic-xl8-mobility-scooter.html

Aug 21, 2009 | Pride New Mobility Legend 4 Wheel Scooter

Not finding what you are looking for?
Pride Mobility Products Casual CL20KD Lift Chair  Chestnut  Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Mobility Products Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1399 Answers

Will

Level 1 Expert

25 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you a Pride Mobility Products Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...