I cant put a 2gb digital card

Clear it by putting in a compatible memory card. The S1030 works with SD cards. Your 8GB SDHC card in not compatible. You need to use SD cards, 2GB and smaller.

Insert the memory card. Press the MENU button. Use up/down to highlight Setup (three horizontal sliders) and press the OK button. Use up/down to highlight "Format" and press OK.

Make sure you're using an SD card. If the card is larger than 2GB than it's actually an SDHC card and won't work in the C330.

The camera only supports SD memory (limit 2GB), not SDHC (4GB and more). The manual claims up to 1GB guaranteed, though the camera recognizes my 2GB card card.

Hi. I tried to use a 4GB card in my dig. camera which has a max limit of 2GB and I got a" card error" message. No harm was done to camera or card.

Use the camera to format the SD card not your computer. There should be a menu option to format it.

this is an older unit, when this unit was manufactured, 2gb memory cards were still unavailable. basically, 2 gb memory cards are not compatible with the unit, try to use a lower capacity memory card

Your camera has no support for SDHC, only SD - this in essence means you can put a maximum of 2gb card.

Good luck.

Try updating you drivers for your digital media reader. Also check your dcos to see if the DMR will read a 2GB card

Hey! samsung SGH-E250 doesn't support 4GB memory card. Try a 2GB or 1GB memory card.

Do the 4GB Cards say SDHC on them? They should. SDHC is simply "Secure Digital High Capacity". They're high capacity SD cards that hold more than regular cards. In this case, 4GB. The problem with these is that they need to be supported by the device. I've never put an SDHC card into a device that doesn't support them, but it looks like that's what your situation is. The highest memory capacity a non-SDHC compliant device is capable of 2GB. I recommend that you return the 4GB cards and buy 2GB cards instead.