PT D-400 How do I get an underscore _ - Computers & Internet

The link to the manual for Brother PT-65 is below. You will find the underscore symbol by pressing the "sym button". Further instructions are on page 4 under heading "add a symbol" if required.
http://download.brother.com/pub/com/ptouch-pdf/UM_PT65.pdf

The usual way as far as I know. Hit the button above ctrl and then the dash button, mine works fine but is a UKmachine. Is your MAC setup for the correct location? i.e. ENGUS? or whatever.

Shift and -

The one next to 0

You do not need to use an underscore character in writing. Just use the "format" option in whatever word processing software you are using and that will underscore a word/words that you select.
If you are not using word processing but are writing to a .txt file, you will be unable to do this, because formatting - including underscored characters - is not an option.

Since when you are facing this problem, did you make any recent hardware or software changes ?
And after you turn on your laptop, don't you see anything after that cursor(Underscore) blinking ?
I mean it boots to windows or not ?

If not try to remove your battery and keep it aside for 5 Mins. and then connect it again. Then try to turn on the laptop

connect external drive & now set booting order from bios select first booting device as usb drive
,save the settings
put bootable disk in drive, boot from it
reinstall your OPERATING SYSTEM.

have a samsung metro PCS and I not find the underscore button. Where is it located? Remember I\'m looking for the underscore button not the hyphen.
it is on the option

when u are on the key pad, press the .?123 button, then the #+= (next to the .)

The key combination can vary depending on what language and keyboard files you're using. However, the easiest way might be to use Windows own Character Mapper to copy the underscore to the clipboard.

Run CHARMAP (in XP, from Start menu -> Run and in Vista from Start button -> start search)

Find the underscore character, and copy it to the clipboard. Go to where you need it and use CTRL-V to paste the copied underscore into wherever it is you need it.

Press and hold the # key until the symbols screen appears. Then use the directional keys to move to the set that contains the underscore, hit the number key that corresponds with the underscore and hit OK.