At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
This is my modem log any ideas for a solution to my random DC's
TimePriorityCodeDescription
1970-01-01 00:01:15
3-Critical
D001.0
DHCP FAILED - Discover sent, no offer received
1970-01-01 00:00:56
3-Critical
R004.0
Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:24
3-Critical
R005.0
Started Unicast Maintenance Ranging - No Response received - T3 time-out
1970-01-01 00:00:08
3-Critical
R002.0
No Ranging Response received - T3 time-out (US 3)
1970-01-01 00:00:07
6-Notice
M571.1
Ethernet link up - ready to pass packets
1970-01-01 00:00:17
3-Critical
D001.0
DHCP FAILED - Discover sent, no offer received
1970-01-01 00:00:15
6-Notice
M571.1
Ethernet link up - ready to pass packets
1970-01-01 00:00:03
6-Notice
M571.4
Ethernet link dormant - not currently active
1970-01-01 00:00:21
3-Critical
D001.0
DHCP FAILED - Discover sent, no offer received
1970-01-01 00:00:02
6-Notice
M571.1
Ethernet link up - ready to pass packets
2009-08-07 11:17:58
3-Critical
R005.0
Started Unicast Maintenance Ranging - No Response received - T3 time-out
1970-01-01 00:01:15
3-Critical
D001.0
DHCP FAILED - Discover sent, no offer received
1970-01-01 00:00:55
3-Critical
R004.0
Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:00:23
3-Critical
R005.0
Started Unicast Maintenance Ranging - No Response received - T3 time-out
1970-01-01 00:00:12
6-Notice
M571.1
Ethernet link up - ready to pass packets
1970-01-01 00:00:12
3-Critical
R005.0
Started Unicast Maintenance Ranging - No Response received - T3 time-out
1970-01-01 00:00:06
3-Critical
R002.0
No Ranging Response received - T3 time-out (US 2)
1970-01-01 00:00:02
6-Notice
M571.4
Ethernet link dormant - not currently active
2009-08-04 21:23:11
6-Notice
M571.1
Ethernet link up - ready to pass packets
2009-08-04 21:23:03
6-Notice
M571.4
Ethernet link dormant - not currently active
2009-08-02 16:48:18
6-Notice
M571.1
Ethernet link up - ready to pass packets
2009-08-02 16:47:56
6-Notice
M571.4
Ethernet link dormant - not currently active
1970-01-01 00:00:25
3-Critical
D001.0
DHCP FAILED - Discover sent, no offer received
1970-01-01 00:00:04
6-Notice
M571.1
Ethernet link up - ready to pass packets
Power Level -15.0 dBmV The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
Upstream Value
Channel ID 1
Frequency 30600000 Hz
Power 54.0 dBmVDownstreamValue
Frequency
567000000 Hz
Signal To Noise Ratio
34.1 dB
Power Level
-15.0 dBmV The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
UpstreamValue
Channel ID
1
Frequency
30600000 Hz
Power
54.0 dBmV
You can't post conmments that contain an email address.
Re: This is my modem log any ideas for a solution to my...
The router actually has major issues. First, check the power cord to make sure that it's operating in the right voltage.
If it is, then through the command line type tracert followed by a website. If there is no response from the first address, then it will not detect the router.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You just need to reset the modem/router. On the back, you should see a small push button. With power on Press for 30 seconds, and then release. Wait for the router to reset. You can then enter the device, using the baseline URL (normally 192.168.1.1, but others vary with the device). You will need to use the admin name and password defaults (you can find these on the internet by searching for them), and then you can interact with the program on the device.
Your problem is on the Cable companies side, there is nothing you can do besides making them come out to fix it. Be warned that some ISPs are known to play the blame game and pin it all on you...I used to work for Comcast and seen this happen regularly.
In short, you are looking for a connection problem in the lines around/in your house.
The long version: The cable wires that run around the neighborhood are the main lines. Every few houses there is what is called a "tap". The tap is a little box with a few ports to connect a regular sized cable to it(the same cable you see inside your house). Fromt he tap the cable goes to your house and "should" be connected to what is called a "ground block". A ground block should have a wire going from it to some type of ground. This is to prevent an electrical shock traveling through the lines into your house and frying anything connected to it. From the ground block it should then go into a "splitter". The splitter has 1 input port for a cable line to connect to and has anywhere from 2-10 output ports. If there are unused output ports, they should be capped off to reduce signal bleeding/loss/interference.
Okay, now the fun part. From the ground block, the next step in your line should be a 2 port splitter. So it should have a cable going into it and 2 coming out. One of the 2 coming out of it should be going "directly" to your modem. If the setup is any different than I just described, your house was wired wrong and could be the culprit to your internet problem.
There is also a possibility that your "tap" is bad, I have seen it more than a few times. A low level tech can fix this.
Also, there are boxes every so often on the main lines that run on the telephone lines. They can be misconfigured and also create internet problems. These will require a higher level technician to fix.
Next possibility is that your modem itself is bad, when you schedual a trouble shooting call with your ISP, ask them to bring an extra modem with them.
Almost forgot an important one, where the cable "screws" into any port on the tap, ground block, splitter or modem...it is not snug tight and you are not getting a full signal. This is a very very very common problem. The endings that screw into things, they are called "F-Connectors" and do periodically require to be replaced.
The tech that comes out to fix your problem, if they do not have a wave length meter on them...they do not have the proper tools to diagnose your problem. An official tech of your ISP will almost always have one on him, it is the contractors that usually do not. Ask for a real tech and not a contractor to show up.
Keep calling when you experience problems. Each time you call, ask for money to be taken off your bill for your troubles. If the person on the phone says they can not do that, ask for a supervisor.
Hi, In most cases you just have to reset your modem and/or router, to do this just unplug the modem for the mains for 2 minutes, plug it back in and wait another 2 minutes for it to settle down, then you can try to reconnect to the server.
In most cases Vista will "discover" your hardware and apply the correct drivers. It is never a bad idea to visit the manufacturer's site to see if they have a more current driver than was selected by the Vista install.
This is not a direct link but should get you the latest driver.
Yes, try reporvisioning another modem on there system that modem is hosed and your going to need another if you bought it from the cable provider or renting it ask them for another modem..
idea uses huawei eg162g data card to unlock this you need to edit the deviceinfo.xml file go through it and where ever it is written "<item
name="WCDMA" Alias="" SMMode="PDU" ProductNet="WCDMA"
SimUnlock="Y">" change it to <item
name="WCDMA" Alias="" SMMode="PDU" ProductNet="WCDMA"
SimUnlock="N"> and save the file remember it is right protected file. to overwrite this save the edited file to some other location and then copy and paste in the program files/idea net setter/
close your idea net setter and restart net setter now you can use any sim cards
Downstream
Value
Frequency
567000000 Hz
Signal To Noise Ratio
34.1 dB
Power Level
-15.0 dBmV
The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
Upstream
Value
Channel ID
1
Frequency
30600000 Hz
Power
54.0 dBmV
×