Screen is always white. Will record picture, but plain white also

hi,
did you check the picture through the view finder ? if it is clear, then there may be snag in the monitor, normally the connecting cable to the motherboard become break, if so should replace it.
if the picture is visible when you turn the monitor to either side, then you can confirm the fault of the cable.

Try a head cleaning cartridge.

The camera has live-view, so is the LCD always white? Can you play back old pictures or view menus properly? Do your pictures turn out white or are they ok?

If it's always white and you can't see anything, you need the LCD replaced or the cable going from the main PCB to the LCD replaced. 99% likely the LCD, not the cable.

If you can playback old pictures and view menus... but NEW pictures turn out white then it's not a problem with the LCD screen at all, it's the CMOS or something else.

Without knowing more detail it's hard to say exactly what's wrong, but it definitely sounds like the camera needs repair.

Thomas

I have Sony Dcr -hc15e is not display on the lcd screen any help? The screen shows plain white . help pls
But i left it unuse for month and the screen swore up a bit with black ink in the middle when it display plain white any way to replace the screen?

Sounds like you need to buy a replacement bottom screen and a tri wing screw driver and take it apart if you good at that kinda thing.

Please disregard the 'Busy' message which may appear on the LCD screen during MPEG movie recording in VX Fine mode. Recording and playback operations, as well as recorded data, will not be affected.

Press up/down on the multiselector to cycle through different views of the image.

Go to www.samsungclassaction.com for more information

Your screen may have burned out, or the wires connecting the screen to the phone may be damaged.

Does the phone display regular pictures during bootup? If so you might be able to reflash the phone and write over whatever problem is causing it. If the phone goes white even when you first turn it on then I'd say it's very likely the actual hardware is damaged.

Hi Sounds to me like the Tuner Module went out, this is something a qualified technician would have to fix.