Drive belt broke murray riding mower how do i put one in?

Hope this helps

try this

Please find attached a "amateur" drawing of the belt routing for the 37x89MA primary deck drive belt. Hope this helps.

I have a Haban Model No. 24577A 42" front mounted snow thrower attachment, which I have mounted to a Murray lawn tractor. I needed to replace the lower drive belt, labeled: V-Belt-Long Part No. 23948 in my Haban manual. I had found it next to impossible to find a replacement belt part number or cross-reference to other brands. I tried many belt sizes and lengths to no avail - belts broke quickly and suddenly after 1 or two uses.

While researching Haban on the internet, I realized that they also supplied snow thrower attachments for Sears Craftsman lawn tractors. A thought hit me at one point in my research... that Haban probably sold the same snow thrower chassis to all manufacturers, but only with different interfaces to the tractors. So I ordered up a belt for a different Haban model that was supplied to Sears, and I think that my intuition was correct!! I have found a belt that works with my Haban Model No. 24577A snow thrower.

The belt that appears to be a direct replacement for the Haban belt part number 23948 (long) is as follows: Kevlar Blue V-Belt 5/8" x 87". It is sold by several suppliers under various part numbers, priced at $20 to $30.

I hope this helps you.

http://www.ereplacementparts.com/ type in your model number all the diags you need, yours Henry

http://www.ereplacementparts.com/ type in your model number all the diags you need, yours Henry

You should be able to get your info here:


http://www.outdoordistributors.com/pdf/Murray/MURRAY-MODEL-42910X92A-LAWN-TRACTOR-%281996%29-PARTS-LIST.pdf

Get the model number off the tractor, go to:

www.murray.com

enter the model number and you will find a manual with pictures of how to route the belts along with a lot of other good information

You can download a manual for your Murray here:
Murray manual
This is in .pdf format so you must have Adobe Reader or equivalent available.
FYI: Murray remnants have been bought by Briggs & Stratton so engine parts are no problem, everything else is sketchy.

Either the cable that engages it is broke or the belt that drives it is broke.

Jim