Televison & Video Logo

Related Topics:

Pete Allan Posted on Jun 16, 2019

DVD in a GU19WDVD10 loads and then comes up with "no disc". Is there an easy fix?

3 Related Answers

Anonymous

  • 463 Answers
  • Posted on Mar 05, 2009

SOURCE: My Zenith DVD player stays frozen on disc loading

Have you tried any non-blockbuster discs with similar results?

Either the lens is dirty (don't go buy one of those cleaners -- they don't work as advertised), or the DVD drive in the unit is bad or rapidly headed that way.

Ad

Anonymous

  • 945 Answers
  • Posted on Dec 04, 2009

SOURCE: load dvd disc, dvd reads disc then comes up with

I am just wondering whether the unit has got condensation inside.

Just try to do this as a process of elimination.

Take the dvd and place in a warm room.Plug it into the mains (try and eject disc if not leave in) and leave for 2-3 hrs
Give it another try..fingers crossed.

rulds2008

Grand Canyon Tech

  • 3867 Answers
  • Posted on May 29, 2010

SOURCE: On my PS3, the DVD disc is stuck and won't come

The issue we have in these units are the eject mech goes bad so you going to have to replace the mech. A mech cost like $150 respectivly it includes the whole laser in fact ig to a picture of a mech for you.19bd17f.jpg EASY FIX UHH not quite. This is involved and if your not prepared I would allow www.videogamerepair.com do the job for you. As a matter of fact they are professionals and do it for way under warranty or out of warranty repair cost charges.

Good luck with the situation there are youtube fixes as well but again if your not in that area of expertise leave it to the experts.

Thanks and please do leave a rating and feedback.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
2answers

Is there an easy fix when the dvd keeps spinning and screen says loading but does not play?

You have to clean the dirt off the laser lens inside as it cant see the codes on the disc.Use a cleaning disc first or it will have to come apart to clean.
1helpful
1answer

WHERE CAN I DOWNLOAD A MANUAL FOR GRUNDIG GU19WDVD10

It likely means a mechanism problem of some kind like the disc is not for whatever reason turning or all the way in position in the unit.
0helpful
3answers
0helpful
1answer

My factory dvd player in my 2003 Mercury Mountaineer has a dvd stuck in it. The dvd will play, but when I hit eject the screen states the loader is blocked. Nothing is jammed or in the loading slot. ...

Unfortunately there isn't an easy fix for an issue like this other than taking it in for service. Some dvd players lock the disc onto a spindle, some use a vacuum type loading system and some use a gear type system for loading and ejecting. Regardless of which type of loading mechanism you have, the only way to fix the problem is to disassemble the dvd player and either fix or replace the bad parts. Sorry to be the bearer of bad news, I wish you the best with it though.
1helpful
2answers

DVD 930 wont load disc that will load in other player

its cause is a special disc some dvds read it and others wont is cause the disc has like other different lens.
0helpful
1answer

When you put in disk it says please put it in a xbox 360 consol

Three things come to mind:


  1. Bad Disc (rare, but it happens)
  2. Dirty DVD laser
  3. General DVD Failure
1), it is easy to determine. Switch game discs and see if the problem persists. If it loads up one game, but refuses to load another, the problem is obviously with the non-loading game disc.

2)you can attempt (if you are electronically adept and inclined to do so) to disassemble the console and manually clean it. Look for a tutorial on this one. Do not use a general DVD laser cleaner that you can buy at nearly an store that begins in "Wal-". If you are still under warranty, call Microsoft and make them fix it - that is what a warranty is for.

3) call Microsoft. You cannot manually replace the DVD drive (as each drive is uniquely linked to the motherboard of its console), unless you painstakingly use a key injector batch program and flash a brand new drive that must be ought separately. Even if you are out of warranty, Microsoft will replace it for around $100 - this may beat you trying to do it yourself.
0helpful
1answer

Won't load DVD

call support from manufacturer on how to reset your player,


For instance, on Samsung players after it is powered on you hold in both channel buttons for 10 sec and the player restarts. that fixed mine that had the same problem
0helpful
1answer

My Zenith DVD player stays frozen on disc loading

Have you tried any non-blockbuster discs with similar results?

Either the lens is dirty (don't go buy one of those cleaners -- they don't work as advertised), or the DVD drive in the unit is bad or rapidly headed that way.
0helpful
1answer

No disc

The optical lens is out of alignment. This is why it will read CDs which have much larger data pits that DVDs.

The unit should be able to read and playback CDs (both production and burned) and DVDs (both production and burned). If the optics are out of alignment and exceed their tolerances, the player will not read discs.

This is caused fromt he player being dropped or jarred.

This is not an easy fix for the home user. This is something that a qualified professional needs to correct.
Not finding what you are looking for?

25 views

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...