You I have been given a samsung xe700t1a from a friend but everytime I turn it on it goes to the bios screen and that's it. Has this happened to someone before? Thank you

If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
Screen-shots to defective LCD and Plasma panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

what PC, all you posted is a screen.
we can not guess 36 years of PCs ever. sorry
my guess is PC is not HP, only the screen
this is near new screen
turn it on, and push the screens menu button.
see the OSD screen, now? sure, and that means the screen is ok.
and the PC is dead.
so post why is PC dead,get 100 reasons.
this position (ROOM LOC?) thing fools me, totally, sounds like bad cable.
or PC has loose parts.
if the PC fails with a borrowed monitor, is bet that makes sense ,, no?
The PC turns on,
the PC makes fan sounds
the PC dvd eject button works
the PC BIOS screens wall work
stop, i stop here we go father easy past BIOS working,
the BIOS hot key will not be the HP key cause yours is not HP

To unlock your tablet, you will have to perform a factory/hard reset of the device.

Performing a hard reset will DELETE ALL DATA from internal device storage and reset the tablet back to the state before you turned on the device for the first time. Resetting the tablet does not erase any system software updates you have downloaded or any files on your SD memory card, such as music or photos.

To perform factory/hard reset please follow those steps:
1. Turn the power off.
2. Press and Hold the Volume Up and Power button at the same time.
3. When the start up screen show (Samsung logo displays on the screen), release all the buttons.
4. Use the Volume Up/Down button to navigate to "wipe data/factory reset", select with Power button
5. Select "wipe data/factory reset"
6. Select "Yes -- delete all user data"
* Allow several minutes for the factory data reset process to complete.
7. Select "reboot system now"
* Allow several minutes for the reboot process to complete.

Hello friends will enter the solution traingo the wrong password 3 times and given a code Bios voilaaaaa the program and show them the transcript of the correct password or posteen luck and let their points, Greetings Undernet Computer.




download link:




http://www.undernetpc.com/pwgen-samsung.zip

Locate and download a program called "OPHCRACK"

Insert disc and restart computer:

Set your bios to start from the CD:


Just press F8 or whatever the screen says for the BIOS settings and/or options..
Set the boot option order to CD first rather than second or third.

The program will run and it will start to recover the passwords(s)

To reset the BIOS password read the information from this link.

In case of your Lenovo laptop the easiest method would be using software from Hiren's Boot CD as it's pretty hard to open it up and reach for the CMOS battery or the jumper.

Change the input to digital using the monitor's menu buttons.

If you get a flashing screen which show your screen for few minutes and then goes blank it may be an issue with the Monitor.

Try to restart the computer and go to BIOS setup screen. If you experience the same issue in BIOS then the monitor needs a repair or replacement for sure.

If your booting to the splash screen ( ACER Logo screen ) then it goes black reboot - access the bios and do a bios hdd test - you mostlily find your hdd has died. Head scrash

See my answer here: http://www.fixya.com/support/t366326-sim_card_puked_need_puk_code