You can try contacting the manufacturer of the STATUS model rct-08 remote control to inquire about purchasing a replacement remote control. Alternatively, you can search for third-party sellers online who may have the remote control in stock. Be sure to check the compatibility of the replacement remote control with your device before purchasing.
SOURCE: i need a user manual for a STATUS model rct-08 remote control as it needs resetting.
Plug the receiver into a mins power socket. The red LED flashes every second.Press any on switch for more than 2 seconds on the remote control. The receiver will learn the code. When the LED flashes continuously after 2 seconds and goes off it means the receiver has learnt the code. You can add various receiver sockets to any one on switch to create a zone. Repeat these last 2 steps for all receiver sockets selecting a different receiver button for each receiver socket. After a power cut pull out the receivers from the mains power socket and repeat the above steps.
Plug the device you want to operate into a receiver socket. Press the on or off button to activate the receiver socket. Or press the on/off button directly on the receiver socket to operate the plug.
To decode. Press the On/Off button on the receiver socket for more than 3 seconds. After 3 seconds the LED flashes once per second, decoding is successful.
Press the All/Off switch on the remote control for more than 3 seconds. After 3 seconds the LED flashes once per second, decoding is successful.
Hope this is OK for you. Peter
LG 3200E, LG 3520, LG 4351, LG 4721P, LG 4730, LG 4821P, LG 4950S, LG 5083, LG 5822N, LG 593W
On blu ray remote control hold down TV Power+01 at the
same time. If the TV turns off the controller is programmed. If not, try TV Power+02,
+03, +04, +05, +06, +07, +08, +09. Different TV BRAND??? ...TRY http://remotes.com/remotes/documents/Samsung/AK59-00104K.pdf
1,100 views
Usually answered in minutes!
Did you ever solve this? I have the same problem.
×