Question about Radio Communications

1 Answer

When I talk people are telling me that htey can not hear or understand what I am saying how do I check my mic?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,289 Answers

Very simple you should be able to tell by sound, have someone else talk into mic while you go the audience. I hope you are using a good quality mic and American cables with Nutrek connectors. If you have a mic and cable together I would replace it. You will need to hours studying mic patterns to determine which pattern you will need. I would us a cardiod pattern not an omni pattern. If you are putting your mouth on or too close the sound will be terrible. Practice your enunciation.

Posted on Jun 10, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: mic doesnt work

Totally the same with me.. any soloutions anyone?

Posted on Jul 10, 2008

  • 1 Answer

SOURCE: I can hear but i cant talk and it says my mic is not plugged in

may I ask u how long have u had this mic because I had mine for a while and this recently started to happen to me and because of the updates sony has been releasing I believe thats the cause because mine didnt start doing that until update 2.41 was released

Posted on Aug 23, 2008

SOURCE: Nokia E90 Communicator - callers can hear me but I cannot hear

try to format your phone, and check if thhe problem persists.
FOR SOFT-RESET:

- at Standby Screen type-in => *#7780#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345


FOR HARD-RESET:

- at Standby Screen type-in => *#7370#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345


FOR FLASHING- TOTAL RESTORE: (Do this if your phone does not boot up)

1) Remove the battery, and then wait for about 20 min or so before putting it back

2) Press and hold these three keys together -Green dial key, Star key[*], Three key [3]

3) switch ON the phone.

4) Do not let go the three keys until you see the WELCOME screen displayed and just let it complete the boot process.

check if this helps. if this doesnt help contact Nokia Care Point-> http://europe.nokia.com/A4388379
thanks for using FixYa

Posted on Mar 04, 2009

srinivas1515
  • 108 Answers

SOURCE: motorola E1000 mic problem

U SHOULD CHANGE THE MIC OK BECAUSE THE MIC IS GONE IT TIME IS OVER IT WILL BE OVER 50 TO 200 RS/-

Posted on May 24, 2009

phoenix09
  • 54 Answers

SOURCE: my xbox 360 headset wont work, it says my mic is

un mute it or your audio receiver might be bad cheaper to buy a new one then to reapir the one you have

Posted on Nov 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i plug in my mic i cannot hear my friends talk but it says my mic is in and i am talking.


You used the term "plug in my mic". I assume you mean the microsoft mic and head set. one of the best ways to check the headset and mic. is to go onto microsoft live and attempt to leave someonw a voice message. during the message you will get a message that says your mic is not working. also after you finish the voice message attempt to play if back if you do not hear anything then the problem is with your microsoft head set and attached mic. if new take if back to exchange for another one. there could possibly be something wrong with the port connection on you microsoft controller.

Jul 01, 2011 | Microsoft Headset for Xbox 360

1 Answer

I have my radio hooked up in my jeep and i can hear other people talk but it seems that they cant hear me talking. Its all hooked up right. i checked to see if there was a tuning thing on it and there...


Turn up "MIC GAIN" also check and see if it keys up full scale 4 watts on output meter. If that doesn't do it change MICS. Go for a power mic by cobra that runs off say a double AA battery. It may be conditions also or your out of range of persons. check Antenna,Swr reads (should be 1.1 to 1.5)on a Radio Shack meter. Try it all.

Jun 11, 2011 | Cobra 19 DX IV CB Radio

3 Answers

I can hear trough my headset but not talk


okay, this is obvious but first of all make sure this switch on your headset is not on mute. If alls good there go to your dashboard settings and you should see communication and make sure none of these are blocked. If this also isn't the problem it looks like you are going to need a new headset. It should have a years warrenty if that helps?

May 31, 2009 | Microsoft Headset for Xbox 360

1 Answer

Motorola E1000 mic problem


U SHOULD CHANGE THE MIC OK BECAUSE THE MIC IS GONE IT TIME IS OVER IT WILL BE OVER 50 TO 200 RS/-

May 23, 2009 | Motorola Mobility E1000 Cellular Phone

1 Answer

My friends can't able to hear my voice in yahoo mesenger


trie checking the mic and the mic settings on your computer

May 17, 2009 | Computers & Internet

1 Answer

I can barely be heard.


May not be your headset as the problem. Check you pc for mic level or plug another mic into it. If you have found this helpful or fixya, please post as such. For more help please go live

Jan 13, 2009 | Logitech ClearChat Style Headset Headset

1 Answer

I bought a Logitech webcam and the sound won't come though. It states my input level is not high emough but I can't find it to change it please


My understanding is that a webcam is only a webcam not a webcam+mic (mic=microphone for sound to be input) unless your webcam has video and sound capabilities.

1. get a mic
2. if you webcam is supposed to be also a mic, (I have yet to see one of those myself) you should hook up the connector for the microphone (usually a a red trs plug/connector) to your pc.
3. make sure your have run the video/sound wizard of your instant message application to test your video, mic and speakers. (to see, talk and be heard and hear what the others are saying)

are you trying to hear what the other person is saying when having a video conversation?
1. check your speakers are properly connected, powered and turned on.
2. check your speakers (and mic aswell) are not muted (check your speaker icon on the system tray and check your volume controls by doing right and/or left click on the speaker icon on the system tray.
3. make sure your have run the video/sound wizard of your instant message application to test your video, mic and speakers. (to see, talk and be heard and hear what the others are saying)
4. make sure your sound adapter's drivers are installed and your device is working properly (check device manager by going to start>run> type devmgmt.msc the press enter and make sure that under sounds you don't have any ? (no drivers) or ! driver problem for your sound adapter.

Sep 27, 2008 | Gateway Computers & Internet

2 Answers

Vaio laptop sound problem


actually that problem should be solve by you checking whether your mic is either faulty or not connected well at the back of your system and not only that and post the understanding message to me well so i can deliver the right solution thanks .

Aug 31, 2008 | Sony VAIO VGN-S460 Notebook

1 Answer

I can hear people talking, but they can't hear me, or they say I sound like an alien


Check to see if the meter needle is swinging backwards when you key up. If it does your final may be bad. If the needle goes forward and others say they see your keying up but no sound your audio chip may be bad; especially if you have tried so many mics and antennas. If your radio has a swr warning light and it comes on this could extremely limit your range and others may not hear you and contiued use will damage your radio. Good luck!!!

Jul 26, 2008 | Cobra 29 LTD CB Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Brad Brown

Level 3 Expert

18067 Answers

Mike Charette

Level 3 Expert

1847 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...