Remote broke can I reset recever - Televison & Video

If you wish to buy its original remote control, contact the authorized service center, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" view, will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too.
http://electro-medical.blogspot.com/

Please check and see if the remote works. please check on this link:

http://www.fixya.com/support/r6178946-tips_repair_remote_controller

CHECK YOR MSG SENTER STTING. AND RESET YOUR MOBILE.. FROM THE SETTING.

BIPIN527

Place the receiver in Standby mode (press the front-panel Standby/On Switch so that the Power Indicator turns orange).
Then press and hold the front-panel OK Button on the Receiver ( not remote ) for at least five seconds until the RESET message appears in the display. Then press OK. The system will go to factory default. All your settings will be lost like FM stations / Sound settings etc: .

Try restarting it! It may reset back to default. If not, then we need more information to help. What are the model numbers?

i have star sat remote sr x5100 plus. i want code to buy a new remote control

i would suggest trying power scan again...

1)hold down tv button next to sat button in top left corner
2) when all buttons illuminate press 500 into remote
3)press pound sign
4)Hello, please help..
5)hold town tv button again.
6)when all buttons illuminate press big red power button
7)press up arrow once a second until tv shuts off
8)press # pound sign
9)try to turn tv back on w/ big red power button
10)if tv doesnt turn back on try again from step 2 but use down arrow instead

if this doesnt work try addressing your old remote to the receiver by pressing record from system info screen

your problem could be in tv- if your remote senser is bad.inside tv your hand unit will not work tv -the television is not receving the signal from remote control.

Change your message memory from phone to external memory and try again ...

take it to a tech to check the system control chip could be bad.good luck