Hello Stephen, indicate brand, model and type of equipment that you are commenting on, in order to find the best possible solution
I wait your answer
Greetings Franco Dosil
Hola Stephen, indica marca, modelo y tipo de equipo del que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil
Testimonial: "Hi Franco. Thanks for replying. It is a Ferguson F5000DAB. DAB MICRO SYSTEM with Docking for Ipad."
Hi Stephen, well, it's a Ferguson F5000DAB, I looked for service manual and I did not have positive results
As you comment, it would seem that the outputs, are either muted or damaged, you can listen through headphones because the F5000DAB, has an amplifier for that use
Test, disconnect the speakers from the equipment and test one speaker at a time, this is to know if there is a speaker wrong and that could cause the failure
If you try everything and you do not get positive results, I recommend you seek a specialized technical service
I sent you the link to download the user manual
I hope you can solve the problem
Greetings Franco Dosil
Hola Stephen, bien, es un Ferguson F5000DAB, he buscado manual de servicio y no tuve resultados positivos
Por lo que comentas, parecer?a que las salidas, est?n o enmudecidas o da?adas, puedes escuchar por auriculares porque el F5000DAB, tiene un amplificador para ese uso
Prueba, desconectar del equipo los parlantes y probar de a un parlante a la vez, esto es para saber si hay alg?n parlante mal y que pueda ocasionar la falla
Si pruebas todo y no consigues resultados positivos, te recomiendo busques un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil
http://dl.jehandleiding.nl/new/external_...
×
SOURCE: Sub Woofer does not work
hi there are fast checkings for you: Quick Connect Card http://www.alteclansing.com/downloads/641QCC.pdf manual: http://www.alteclansing.com/downloads/641_MAN.pdf is the system working fine exept the sub? my guess: the headphone jack works fine then the speakears are too if soo then the sub amp is bad or some connection is torn try opening the sub and see if everything is hooked right and if soo then the amp is the problem every electronics shop can fix this good luck
SOURCE: no sound through the headphones
The way the headphone jack works is:
plug your headphones in and then mute the television using the remote.
While the TV is muted you can still use the volume up and down controls to adjust the volume through the headphones. I find that having the volume at 60-75% is more than loud enough on the headphones.
Just be careful when you unplug the headphones and take the TV off of mute, if your volume levels are still turned up you will be in for a jolt :)
SOURCE: Truck Radio/CD Player, no sound coming out of speakers
Have you check the mute mode, maybe it is in mute mode.
SOURCE: Logitech THX Z-2300 Speakers Don't work and subwoofer does
Well, just because someone at Logitech said the speakers are definitely broken doesn't necessarily make it so. They told me the same thing, yet when I read on another forum that plugging earphones into the wired remote sometimes seems to make things better, I plugged earphones into the wired remote -- and Voila! All of a sudden the blue light went on and I had sound from all three speakers. The sound continued working properly even after removing the earphone jack. IMO the problem could be with the wired remote rather than with the speakers themselves. My speakers work again!
SOURCE: my speakers wont work suddenly unless I am using my headphones
Make sure in the volume mixer that it is using the right sound device. You most likely have it set to the wrong device output. When you plugged in the headphones in kinda automatically switches, but to use the speakers again you have to do it manually. Just hook up a cheap av receiver to your computer and use this headphone input instead. a 100$ 5.1 av receiver beats any pc speaker system.
Just found this and it worked! Hope it does for you as well:
There should be a button on the DVD remote control with a headphone symbol on it. Make sure the headphones are turned on(red indicator on earpiece) and push the headphone button on remote. The headphones will only work in the back seats of the vehicle. Once you have audio to the headphones, you should be able to hit the AM/FM button on the radio and listen to the radio while back passengers use the headphones for video.
38 views
Usually answered in minutes!
×