I ant access or being blocked to Literotica.com

try this...

Contact westinghouse Channel Access Service by:
web: www.westinghousedigital.com/support;
select Channel Access and enter Access info.
Text Message: Text Tuner to 95495
Phone:1-800-701-0680 follow instructions

First check the current source. Press the Input button on the TV (second from the left) or on the remote (below 9) until the correct Antenna input (Ant 1) is selected. Make sure that the antenna is connected to Ant 1 (the RF connection closest to the back HDMI ports). You only use Ant 2 if you have a coaxial (RF) cable connection. Then press Menu and then try the Setup menu again. You should be able to access the Installation menu and Terrestrial sub-menu now. Change the Input Configuration for Ant 1 to Antenna before attempting to Program Channels.

If this doesn't work, try resetting the TV to the factory settings. You'll have to access the Menu, go to the Installation sub-menu and then select the System Status and then System Information. Select Factory Defaults and enter the PIN. See the manual for the default PIN if you haven't changed it. Then confirm the reset. The manual is available from the product support page: http://support.toshiba.com/support/modelHome?freeText=2841536 . The direct link to the manual is http://cdgenp01.csd.toshiba.com/content/support/manuals/userguides/su2846615/42hl196_om_e.pdf . See page 29 for the PIN. Then try accessing the Terrestrial menu and scanning for channels.

I hope this helps.

Cindy Wells

Maybe you didn't get the queen ant...lol. No really, ants in your fuse block? Gee, if any ants got near hot electrical parts of the running engine, you'd have a flying frying ant machine !
I think that's what you got to do, Tracy. That is, check for fried ants everywhere else. They killed your main relay. You need to clean out the whole relay block maybe.

Thecost really depends on the of the bottle. If you just need it for homeuse, you can get a smaller quantity. This site has many termite/carp ant killerproducts, check it out http://www.nextag.com/carpenter-ant-termite-killer/compare-html

inside the left rear 1/4 panel cover a 10mm nut holds the ant bracket, then unscwew the top nut at the ant base. pull it through the bottom unplug the ant lead and ground wire. easy said then done right !...

Dear Sir,

Go to http://xviruslab.blogspot.com, and download Quick Heal Total Security (PC Mobile Scan and Data Theft Protection, Anti Phishing) or Quick Heal Anti Virus Plus, mail me if you're facing any problem.

Thank you

Bye bye
keerthy