Whistler wbu 900 activation bypass S - Whistler Vehicle Parts & Accessories

Assuming you have an aftermarket stereo with a display, it should have instructions for wiring the backup camera. You usually have to splice into the backup lights positive wire and run a jumper to the stereo. The stereo may have power for the camera as well as the signal wire. If no power wire, it may have a switch wire. If just a switch wire, you will need to run accessory power to the camera. You will also need to connect the camera ground wire to the frame of the truck. Read the instructions for both the stereo and the camera carefully.

There's a website that has all this
information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

There's a website that has
all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

You must buy those.

ARMED with your Serial Number (from the device) and due to it's relatively new product age, I think WHISTLER 'Customer Relations' will be willing to help you!

"Tech support" may not be so willing.

Anthony

For whistler product manuals visit their website ( Whistler Group Inc ) or call 800-531-0004 Whistler Group Inc

For whistler product manuals visit their website ( ) or call 800-531-0004 Whistler Group Inc

The on/off switch in Hoover Windtunnel upright vacuum cleaners is operated by a lever in the handle assembly.  remove the two screws on the back ovf the vacuum and see if the lever has bypassed the switch assembly.  if so, re-assembly should fix the problem.  It is also possible that the switch activating lever has broken.  If so, replace the activating lever.