What do A B C stand for on the small progam dial

where does it come to a stop
five mins in to progam or at rinse

Press Program Press the button to store Press 2 then your outside line access code (usually 9) Then dial in the number to dial Press Store

Tilt the mixer up, look at the joint where it connects to the stand under the "belly" of the mixer. You should see a small silver screw. Dialing it out will raise the head of the mixer, dialing it in will lower it.

There are many variations for a Norlake system
I assume the cooling coil hangs from the ceiling of the cooler and the condensing unit sits on the top?
The temperature is controlled by a control that is located in the condensing unit on the top of the cooler. This can be either;
\ a digital thermostat. You will need the progam key to get in
\mechanical thermostat. Adjust the dial setting
\ pressure stat. Adjust the dial setting

Probably best to get a technician in

Hi from retired Englishman in SW France,
You say it's a brand new machine- then you must contact the vendor/supplier immediately without attempting to find out what is wrong with it It is under guarantee, isn't it?
Sort them out ;-0)
Good luck,
John C

empty water into tray..front bottom right ..undo cover ..check for objects in filter unit.refit then test.

Press the additional key button,scroll to no 3 faxsettings,press ok,scroll to no 5 pro touch key,press ok,Program the one touch keys from 1 to 12

As I'm aware you can not program a number before every number you use. However you can progam the one touch or speed dials you can enter the 9 before the numbers. On some systems thay may need 9 then a pause then the number.

When i turn it on, it doesn't start turning

You may not be progammed for outside call on those lines or they may be Centrex lines which require a "9" to be dialed first.