Question about Dewalt Tools & Hardware - Others

Open Question

I need help reassembling a Dewalt DW433 sander.

I replaced one of the tensioning rollers and noticed two cylindrical rollers on the table and do not know where they go back. The diagram of this sander shows this as tracking roller item 29 but no arrows showing where they go.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 22 Answers

SOURCE: Craftsman 3x21 plastic front roller needs replacing

Do you know anyone with a metal lathe or that works in a machine shop? If you do ask them if they can make the rollers for you out of metal. Or else find a machine shop and ask them to make you new rollers.

Posted on Apr 01, 2009

Ad
wracefans24
  • 1985 Answers

SOURCE: i NEED A DIAGRAM SHOWING HOW TO REMOVE THE TIMING

it be in your best interest if you would buy a Haynes book on your car from AutoZone for about $20.00,
It is what I use at the shop,it gives alot of info even wiring diagrams,to engine rebuilding.

Posted on Jan 19, 2010

seanpwright
  • 2030 Answers

SOURCE: Dewalt DW433 belt sander stop working, why?

Check the brushes for the motor they may have gone bad or broken, I have seen this happen before on dewalt tools.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Posted on Apr 02, 2010

radar001
  • 1051 Answers

SOURCE: I just used my DeWalt

You can probably get an owners manual at www.retrevo.com It's a free site but requires registration (also free).

Posted on Oct 31, 2010

daryl441918
  • 1280 Answers

SOURCE: Our Canon PC950 has recently

Yes the smudging is a sign that you are running out of toner. Check with someone like Office Depot and be sure they have your toner cartridge in stock. Instructions on how to remove your cartidge and install the new one should come with it.

Posted on Feb 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just need to know how to remove and replace the drive pulley on the DeWalt 432 belt sander.


You need a Screwdriver (Phillips) and a pair of Pliers... Get the Pulley FIRST, Take the screws out and split the case, you will see the Pulley. Replace the Pulley and reassemble

Apr 08, 2013 | Tools & Hardware - Others

1 Answer

I bought a DeWalt belt sander model DW433, yet no manual.Lowes told me I can download it online. The problem it only comes in spanish, so where can I get an english one? This is America isn't it?


I found the manual in English (pages 1-2), French (pages 2-4) and Spanish (pages 5-6) as a PDF here: http://servicenet.dewalt.com/Products/Detail/DW433# . See under Downloads on the right hand side of the page. Multi-lingual manuals are the current normal due to international manufacturing and sales; it saves in the production/packing costs.

There are other models that start DW433. to get their manuals start here: http://servicenet.dewalt.com/Parts/Search?searchedNumber=DW433&searchType=0 . Start at http://servicenet.dewalt.com/ for other Dewalt tool manuals.

I hope this helps.

Cindy Wells

Mar 21, 2011 | Tools & Hardware - Others

1 Answer

Dewalt DW433 belt sander stop working, why? While sanding shutters, my sander just stopped. Any fixes?


Check the brushes for the motor they may have gone bad or broken, I have seen this happen before on dewalt tools.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Apr 02, 2010 | Dewalt DW433KT Heavy Duty 8 Amp 3 Inch By...

1 Answer

The belt slips off my Belt Sander


All sander will have two adjustments. The first is to release the sanding belt by retracting the position of one of the rollers. The second adjustment moves one of the rollers belt tension from side to side. The roller angular position is changed, sometime by a single knob or screw, and sometimes by two separate adjusting screws.

Jun 19, 2009 | Dewalt DW433KT Heavy Duty 8 Amp 3 Inch By...

2 Answers

BELT SANDER ADJUSTMENT


Try removing the adjustment screws and applying some Teflon thread sealant. That should prevent the screws from turning on their own. Another thing you can do it check the pulleys with calipers and make sure it is still cylindrical. I have seen ones that become worn on one side. Finally, roughly check the belt tension on both sides and make sure they are approximately the same tension.

Good Luck!

Ben Steigerwald

Jan 11, 2009 | Tools & Hardware - Others

Not finding what you are looking for?
Tools & Hardware - Others Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Tools & Hardware - Others Experts

John Trevino

Level 3 Expert

1407 Answers

Ruben Bustamante

Level 2 Expert

120 Answers

john h

Level 3 Expert

21920 Answers

Are you a Dewalt Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...