Hello Roy, for what you describe, your JVC TV, has power problems
You can try plugging it into another power outlet, if you have power cord, interlook type, you can change it
If with all these tests, you have no result, the problem is inside the television, probably in the power supply
If you have technical knowledge, I suggest you remove the back cover and locate the power supply and check if the fuse is burned, if so, replace it with an equal one, no more small, or larger current capacity, to avoid faults worse
If the fuse is bad, replace it and burn again, this would definitely say that the problem is in the power supply
In this case, I suggest you approach a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil
Hola Roy, por lo que describes, tu televisor JVC, tiene problemas de alimentaci?n de energ?a
Puedes probar conectarlo en otro toma corriente, si tiene cable de corriente, tipo interlook, puedes cambiarlo
Si con todas estas pruebas, no tienes resultado, el problema esta dentro del televisor, seguramente en la fuente de alimentaci?n
Si tienes conocimientos t?cnicos, te sugiero que le saques la tapa posterior y ubiques la fuente de alimentaci?n y revises si el fusible esta quemado, si es as?, reemplazalo por uno igual, ni mas chico, ni mas grande en capacidad de corriente, para evitar fallas peores
Si esta mal el fusible, lo reemplazas y se vuelve a quemar, esto dir?a definitivamente que el problema esta en la fuente de alimentaci?n
En este caso, te sugiero que te acerques a un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil
https://www.teamknowhow.com/content/dam/pdf/JVC%2039'%20LED%20Smart%20HD%20TV%20LT-39C740%20Manual.pdf
SOURCE: Blue light
Okay, I found a fix! Called JVC, spoke to somebody there, here it is:
1)unplug the TV completely, no wall no power strips, completely
2)wait 10 sec
3)plug TV back in and Turn it on, the light will still be doing the same thing
4)wait 30 sec
5)ON THE TV, not the remote, locate the menu, volume (-) and power button.
6)while simultaneously holding down the menu and volume (-) button, pressed the power button ONCE and continue to hold the other 2 for 10 sec.
7)on the remote control, go to menu>settings>system info
*** now this I know as a FACT will work on systems that display: JVC - ver.5.32FO001, but I don't know of any other versions***
8)press the mute button on the remote twice
9)unplugg TV again and wait 10 sec.
10) plug TV in and turn on
It SHOULD be working normally now... Thanx to the guys a JVC support for this one, I know it seems like an obvious first place to look, but sometimes it isn't. I for one checked online forums first.
SOURCE: JVC LT-32P679 Blinking Power Light, Automatic Shutoff
1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear
I think this is right. I got it from the JVC call centers guys so sorry if I missed or messed up a step.
SOURCE: I have a JVC LT-42X579 TV. I got home tonight and
This is common problem of the failure of power supply board inside TV. You need technician to figure out this problem.
SOURCE: My JVC LT-47X579 is not "turning on" since we
hmm i had the same problem the saturday before on my lt-42x579but i didnt have anything hooked up to it blue light came on then flashed ..no pic this happend one week after it was pd off from a rental store we should investigate
SOURCE: JVC LT-42X579 blinking blue light
wow thanks you thanks you God bless you who figured it out worked fabulously thanks again
246 views
Usually answered in minutes!
×