Question about Konica Minolta bizhub Office Equipment & Supplies

Open Question

My bizhub 210 photocopier displayed supply toner and toner has been changed still writing same why?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 10 Answers

SOURCE: service manual for KONICA MINOLTA Bizhub 210/162

Swithc off the machine Press stop button and hold switch on the machine. problem will go.
Good Luck

Posted on Jan 07, 2009

Ad
  • 5 Answers

SOURCE: After a power surge it comes up with a C0501 malfunction code and shuts itself down

Turn ON the Power Switch with the Stop key held down. This also works on bizhub 162

Posted on Aug 10, 2009

canontech
  • 1219 Answers

SOURCE: canon Ir2018 always indicating ''no toner, change toner''

Because you need to clean and shake the toner unit. When you say " ive been fixing" does it mean that you now what you are doing or?
If yes dismantle the toner unit and vacume it, it may be that toner stucked on "antena" for toner recognitions.
If not - call service


Pls. rate

Posted on May 10, 2010

xeerie
  • 347 Answers

SOURCE: Konica Minolta bizhub 163 Display

Code M2 means your photocopier machine require maintenance.In maintenance some old parts of your machine will be replaced with the new one and all this will be performed by technical services representative.

Posted on Jan 01, 2011

SOURCE: Konica Minolta bizhub 163 Display

Konika Minolta BizHub 163 - Error Code M2
Press the Utility button,
then Stop 0 0
then press again Stop 0 1
then scroll to Clear Data, and then Supplies Data and clear.
You must be aware that clearing this counter clears the drum, developer and other counters.

Posted on May 21, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My photocopy machine name is Toshiba e studio 2303A. Now showing in the display empty :Toner.


Hello -

Your Toshiba photocopier needs fresh toner.

Check the user manual regarding what toner to purchase and how to add it to the machine.

Best wishes.

May 31, 2018 | Toshiba Office Equipment & Supplies

1 Answer

Solution to bizhub 210 error code c1300


Problem

Polygon Motor malfunction
-Startup failure
- Lock signal fault: Unstable after the first Lock signal has been detected
- Lock signal fault: Lock signal out-of-timing

Solution

1 Turn OFF and ON the Power Switch. 2 Check for proper connection between the PH Unit and Master Board and correct as necessary. 3 Change the PH Unit. 4 Change PWB-A.

Aug 15, 2017 | Konica Minolta Office Equipment & Supplies

1 Answer

I have one photocopier bizhub 501 and have error code 2801/03..Can you help me? thnx


Take the toner bottle out. Then you will need to remove several cover to gain access to the sensor way in the back of the where the toner bottle goes and clean that sensor. might even need replacing.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Aug 25, 2015 | Konica Minolta Bizhub 501 Copier

1 Answer

Loud knocking sound when copying on a bizhub 162, why?


replace the drum and developer and sounds like the fuser need to be replaced

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Apr 10, 2014 | Konica Minolta Office Equipment & Supplies

1 Answer

My konica minolta bizhub 210 shows paper jam after taking two or three copies continously...


where does it jam the screen will display where the paper is jammimg

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sep 16, 2012 | Konica Minolta bizhub 180 All-In-One...

6 Answers

Konica Minolta bizhub 163 Display M2. and not functioning Photocopy. Please sugest me ?


Code M2 means your photocopier machine require maintenance.In maintenance some old parts of your machine will be replaced with the new one and all this will be performed by technical services representative.

Dec 29, 2010 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Is it possible to scan using 210 model scanner by network?


Yes, it is possible ti use Konica Minolta bizhub 210 photocopier as a network printer.For this simply purchase network card Model NC-502 for bizhub 210.

Dec 17, 2010 | Konica Minolta bizhub 180 All-In-One...

3 Answers

My copier is konica minolta bizhub 210 have problem error code M1. please help me solution.


My Friend You must do general service in your photocopier and then you must program your machine.

Sep 29, 2010 | Konica Minolta bizhub 180 All-In-One...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...