Model 9000. Why doesn't light work?

I'm pretty sure you just swing open the lamp cover and the bulb will be right there. It just pulls out.
This is a halogen bulb and will be spendy (over $20).

Hi Rhonda I have a 9000 and a 500e and the light should be directly above the needle shaft.
Good luck

You can find it inside the side cover (left hand side).

contact a brother sewing machine dealer and see if they have one

You can get the manual here,follow the link below.

http://ifixmachines.com/Janome-9000-Memory-Craft/Janome-9000-Memory-Craft-Sewing-Machine-Manual/ilvm_fly1_blue.tpl.html

rx9000 when i turn on beeps f8

Hi Wendy,
If you care to email me I can send the MC 9000 screen reset details as a first step to identifying the problem.
Please remember to specify what you are requesting as there is no direct link from this site and we receive many requests each day.
Use the Contact Us form at the site linked below
Cheers
Martyn
Bargain Box

Yes, the touchscreen can be replaced, but is unlikely to be a problem, will be replaced FOC if within 5 years of purchase. A dimming screen is the LCD Backlight not the screen itself. Depending on your location, your country's supply of parts should last for many years, subject to demand, as with anything. .....but eventually they will become depleted Try eBay as a shopper to see the current value of your machine in the market.
If you would like me to send you the Diagnosis Chart for testing operation, please contact me HERE, just make sure you specify the nature of request and the model you refer to, as many requests arrive daily.

hi just above the screen if you look in side the machine where your cotton fits their is a little wheel you can spin to adjust your screen hope this helps