Ifb dishwasher pdoes not work even after cleaning hose filter (F5)

Hey Karen, Water in the bottom of the dishwasher results from clogs in the filter or in the drain hose. Before you do any work on your dishwasher, make sure that it's switched off at the mains. If cleaning your filter hasn't resolved the issue, then the next thing that could be preventing your dishwasher from draining is a blocked drain hose. Is your dishwasher displaying an error code? If you see the E25 error code on a Bosch dishwasher, that means the filter is blocked or clogged, and water cannot drain out of the machine correctly. You can check all Bosch dishwasher codes here: https://www.justfixed.co.uk/bosch-dishwasher-error-codes/

Good luck!

Best,
Dave, Just Fixed

Inadequate water supply most likely caused by faulty water valve v

If your IFB dishwasher is a Neptune DX model, Error code F5 according to the owners manual is "Inadequate water supply"

F5

Inadequate water supply • Make sure the water input tap is totally open and that there is no water cut.
• Close the water input tap, separate the water input hose from the tap and clean the filter at
the connection end of the hose.
• Restart your machine, contact the service if the error resumes.

The F5 code means that the machine is not draining.
Either there is something blocking the drain line or the drain pump is defective!
first check the filter then the drain line!

Hi
Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dishwasher and remove the drain hose and check for any visible clogging. If still not visible then the drain filter or drain pump is clogged and you'll need to clean the drain filter and drain pump. Also, check for any food pieces stuck near the pump impeller.
Please note that dishwashers don't drain out the complete water such that heating element doesn't overheat. Hope this helps... Please post back for any further assistance.

Hi,
"Error A05 - Pressure switch has not been reset "

This is centered around the filter and drain area not working properly.
It is possible it just needs the filter cleaning and the hose flushing out, but also possible the pump needs to come out to clean it properly.
Drain it by putting the hose low down, and clean the filters of debris.
If this does not fix it, then remove the unit outside, lie on it's back and remove the pump to clean it.

Hi,
Search "ifb error codes" alternatively substitute ariston for ifb.

try a product called " greased lightning". spray bottle, should work for you. apply, let set for a few minutes and scrub with plastic bristle brush . you may have to er-apply and scrub a bit, but it will remove the tar.
future referance; try this product and spray your filters clean with your garden hose.[maybe even an oven cleaner and hose]
gemerally the thngs that gather on an air filter i dont want in my
dishwasher.





]