Followed suggestion but no change. Thanks anyway.

Thanks for further information. One other question I should have asked is - is the battery a genuine Nikon or another brand substitute. Not that is really matters but some of the non-genuine batteries seem to die early. I suspect your battery has died and, given it is only 2 motnhs old I would suggest you return it o the vendor who may be able to test it and should replace it anyway.

try to shake the toner cartridge well & clean the board at its end

Not sure why u need to go to menu. If you want to connect lapotop to TV attach the cable turn on laptop and monitor and hit FN F5 the laptop screen will then be diusplayed on monitor Fn F9 turns it off


please4rate my help++++Thanks for using FIXYA

I got the unlock code (subsidy password) from T-Mobile. The problem was that when I inserted the non-T-Mobile SIM card I got the "contact service provider" message instead of a prompt to enter the unlock code. I contacted T-Mobile again and they asked me to wait about 30 minutes for the "contact service provider" message to go away and the prompt to show up. (I also saw a lot of postings on the internet suggesting the same approach, with the wait period variously between 15 minutes and 24 hours.) I followed the suggestion and the correct prompt came up after about 1 hour. Then everything worked as expected. Thanks, anyway, for your offer of help.

George Rabindran

Boot up in safe mode Pressing F8 while computer is booting then shutdown and restart.

I received a message from a member of the group suggesting a solution to the problem.  I followed his advice and the problem was solved.  My thanks to him and to the group for the assistance.
Now I need a manual for the Casio CBX-102.  This will be a gift to my grandson who is attending college and needs to understand how to use the Data Bank.   If anyone can suggest a source for the CBX-102 Data Bank watch I'd appreciate it.
Thanks to all,
Bill D 

well i fixed the problem. if anyone wants to know how, just send me $9.99 (fiya price) and i will be glad to share.

Not sure as a friend did it. Thanks anyway.

Thanks for getting back so quickly- I have already solved the problem so thanks anyway! I just had to install it with the CD. and followed the prompts . It was all installed in english. :-)

LF flashes when the water level does not change for a period of time after the valves are turned on OR water has disengaged
the basket but control does not detect a water level change.
• Is water supply connected and turned on?
• Are hose screens plugged?
• Is water entering the tub? If so check pressure hose connection to machine/motor control.
under control console