Question about Dewalt Tools & Hardware - Others

Open Question

How do you get the rear roller off of a Dewalt DW 433 belt sander?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 384 Answers

SOURCE: i have smoke coming from motor of my dewalt dw-708

Stop and unpug it if it hasn't already burnt the house down.

Posted on Aug 05, 2009

Ad
  • 1 Answer

SOURCE: I have a Canadian tire model 55-3550-2 belt/disc

I went to a bearing/powertransmission supplier. The number on the belt was all they needed. Picked up a new belt for $6.50.

Posted on Nov 28, 2009

  • 302 Answers

SOURCE: Black & Decker 3X21

I have one of those and I just smack the front roller ahead with a brass or plastic hammer. I hit the movable bracket that the roller is attached to. It takes a pretty stout whack to do it though. hope this helps you

Posted on Jan 14, 2010

Testimonial: "Thanks for the help, I wasn't sure if there was some magic button I was missing. Tks, jw "

seanpwright
  • 2030 Answers

SOURCE: Dewalt DW433 belt sander stop working, why?

Check the brushes for the motor they may have gone bad or broken, I have seen this happen before on dewalt tools.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Posted on Apr 02, 2010

  • 34 Answers

SOURCE: I use Dewalt random orbital sanders regularly

The velcro pads wear out and need to be replaced periodically. You can buy new pads on-line at any Dewalt parts seller.

Posted on Aug 09, 2010

Testimonial: "Thanks much,. I suspected that that was the case but have been unable to find the replacement part. I'll try again."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I accidently ran over the cord with my DW430R 5.2 Amp belt sander and it's wedged so tightly between the wheel and sander body and I can't get it out.


If you release the belt that would give you more room to get the cord out. When you releas the belt it brings the rollers together which loosens the belt.

Mar 13, 2011 | Dewalt Tools & Hardware - Others

3 Answers

How do you replace he belt on a 7447 Sander


To change belt:
1) Put front roller on floor and push down until roller locks back.
2) Put on new sand paper.
3) Loosen tracking screw until front roller is released.
4) With sander running, use tracking screw to center belt.

Oct 10, 2010 | Black & Decker BR300 3''x18'' Belt Sander

1 Answer

Dewalt DW433 belt sander stop working, why? While sanding shutters, my sander just stopped. Any fixes?


Check the brushes for the motor they may have gone bad or broken, I have seen this happen before on dewalt tools.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Apr 02, 2010 | Dewalt DW433KT Heavy Duty 8 Amp 3 Inch By...

1 Answer

The belt slips off my Belt Sander


All sander will have two adjustments. The first is to release the sanding belt by retracting the position of one of the rollers. The second adjustment moves one of the rollers belt tension from side to side. The roller angular position is changed, sometime by a single knob or screw, and sometimes by two separate adjusting screws.

Jun 19, 2009 | Dewalt DW433KT Heavy Duty 8 Amp 3 Inch By...

1 Answer

Motor runs but the drive drum that hold the sanding belt does not turn.


Instead of removing the drum, remove the belt and the cover over the gearbox. The gearbox cover is normaly fixed in place by screws around the drive pulley. There may be a couple of screws under the pulley, if so they can be accessed via holes in the pulley wheel itself. Check for worn or stripped gears. These gears can be replaced if need be, but if this is the case make sure you remove and clean out all the grease first and replace that aswell as it may contain bits of teeth that have come off the faulty gear. As far as I know belt sander drive rollers can not be removed without removing the drive inside the gearbox first.

Oct 27, 2008 | Dewalt Factory-Reconditioned DeWalt DW432R...

Not finding what you are looking for?
Tools & Hardware - Others Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Tools & Hardware - Others Experts

John Trevino

Level 3 Expert

1420 Answers

Ruben Bustamante

Level 2 Expert

120 Answers

john h

Level 3 Expert

22408 Answers

Are you a Dewalt Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...