My dishwasher latch will not workmodels number wdt920sade2

make this tests and fix it. God bless you

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

make this tests and fix it. God bless you

Thermal Fuse

If the dishwasher won't start the thermal fuse might have blown. The thermal fuse helps to prevent damage to the dishwasher by turning off power so that it doesn't overheat. Once blown, the thermal fuse will have to be replaced for the dishwasher to work. The thermal fuse is usually located in the control panel on the control board or mounted to the bottom of the tank behind the lower panel. The thermal fuse can be checked for continuity.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Door Switch

The door switch, or switches, are sometimes called interlock switches. The door switch prevents the dishwasher from running while the door is open. If the dishwasher won't start, the switch or switches might be defective. To access the door switches, remove the control panel or inside door panel - depending on the model. They can be tested for continuity.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Door Latch

If the dishwasher does not start, the door latch assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door latch is broken, replace it.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Main Control Board

The main control board provides power to nearly every component of the dishwasher. If the dishwasher won't start the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Touchpad and Control Panel

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced. On some models the touchpad and control panel are sold together and will need to be replaced at the same time.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Touchpad

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Timer

The timer allows power to flow to the proper parts at the proper times. If the dishwasher won't start, the timer might be defective. Keep in mind that timers are often misdiagnosed as the cause of a problem. Check other components first before replacing the timer.

test this steps and fix it. God bless you

Thermal Fuse

If the dishwasher won't start the thermal fuse might have blown. The thermal fuse helps to prevent damage to the dishwasher by turning off power so that it doesn't overheat. Once blown, the thermal fuse will have to be replaced for the dishwasher to work. The thermal fuse is usually located in the control panel on the control board or mounted to the bottom of the tank behind the lower panel. The thermal fuse can be checked for continuity.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Door Switch

The door switch, or switches, are sometimes called interlock switches. The door switch prevents the dishwasher from running while the door is open. If the dishwasher won't start, the switch or switches might be defective. To access the door switches, remove the control panel or inside door panel - depending on the model. They can be tested for continuity.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Door Latch

If the dishwasher does not start, the door latch assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door latch is broken, replace it.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Main Control Board

The main control board provides power to nearly every component of the dishwasher. If the dishwasher won't start the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Touchpad and Control Panel

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced. On some models the touchpad and control panel are sold together and will need to be replaced at the same time.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Touchpad

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Timer

The timer allows power to flow to the proper parts at the proper times. If the dishwasher won't start, the timer might be defective. Keep in mind that timers are often misdiagnosed as the cause of a problem. Check other components first before replacing the timer.

test this steps and fix it.God bless you

Thermal Fuse

If the dishwasher won't start the thermal fuse might have blown. The thermal fuse helps to prevent damage to the dishwasher by turning off power so that it doesn't overheat. Once blown, the thermal fuse will have to be replaced for the dishwasher to work. The thermal fuse is usually located in the control panel on the control board or mounted to the bottom of the tank behind the lower panel. The thermal fuse can be checked for continuity.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Door Switch

The door switch, or switches, are sometimes called interlock switches. The door switch prevents the dishwasher from running while the door is open. If the dishwasher won't start, the switch or switches might be defective. To access the door switches, remove the control panel or inside door panel - depending on the model. They can be tested for continuity.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Door Latch

If the dishwasher does not start, the door latch assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door latch is broken, replace it.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Main Control Board

The main control board provides power to nearly every component of the dishwasher. If the dishwasher won't start the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Touchpad and Control Panel

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced. On some models the touchpad and control panel are sold together and will need to be replaced at the same time.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Touchpad

If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Timer

The timer allows power to flow to the proper parts at the proper times. If the dishwasher won't start, the timer might be defective. Keep in mind that timers are often misdiagnosed as the cause of a problem. Check other components first before replacing the timer.

see all this steps and fix it. God bless you

Door or Lid Latch Assembly

If the door won't latch, the latch assembly might be defective. Inspect the latch assembly to see if it is cracked or worn out. The latch assembly is normally replaced all as one part.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Hinge

If the door won't latch, one or more of the door hinges might be bent or broken. If the door hinges are not working properly the door won't close squarely and then the door won't latch.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Catch

If the door won't latch, the door catch might be out of alignment or broken. If it appears to be OK, reposition it as needed. If appears broken it should be replaced.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Lock

If the door won't latch, the door lock assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door lock is broken, replace it.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Latch

If the door won't latch, the door latch assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door latch is broken, replace it.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Strike

If the door won't latch, the door strike might be defective. These are normally made of plastic or metal and cannot be repaired. If the door won't latch and the door strike is broken, replace it.

Door or Lid Latch Assembly

If the door won't latch, the latch assembly might be defective. Inspect the latch assembly to see if it is cracked or worn out. The latch assembly is normally replaced all as one part.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Hinge

If the door won't latch, one or more of the door hinges might be bent or broken. If the door hinges are not working properly the door won't close squarely and then the door won't latch.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Catch

If the door won't latch, the door catch might be out of alignment or broken. If it appears to be OK, reposition it as needed. If appears broken it should be replaced.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Lock

If the door won't latch, the door lock assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door lock is broken, replace it.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Latch

If the door won't latch, the door latch assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door latch is broken, replace it.

Enter your model number to see parts for your dishwasher.

Help me find my model number

Door Strike

If the door won't latch, the door strike might be defective. These are normally made of plastic or metal and cannot be repaired. If the door won't latch and the door strike is broken, replace it.

THAT IS WRONG MODEL NUMBER THERE IS MORE NUMBERS..
When you get correct model go to searspartsdirect.com and you can order yourself.

please provide model number of the Whirlpool dishwasher or the part number of the latch that you have got

Source for 144 different parts for your dishwasher:
http://www.searspartsdirect.com/partsdirect/part-model/Maytag-Parts/Dishwasher-Parts/Model-MDB8601AWS10/3048/0130000?searchedModel=mdb8601aws&blt=

Don't try to bend anything! The latch mechanism in the door is probably broken. Open the door and remove the 11 torx screws holding the inner panel on. You will probably find broken plastic bits on the pathetically flimsy latch; mine failed after 4 years and I expect it to happen again.
If you do, see the link given in "I Have 3 problems with my dishwasher, my...",
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5168615&diagram_id=1349844#d1349844 Unlatch the two switches and slide them off the old part and onto the new one, observing all the obvious precautions about not getting shocked and putting the switchess on correctly. Reassemble the door and latch with the screws.