Question about Avital Vehicle Parts & Accessories
Posted by Anonymous on
When the car starts the remote start unit either recognizes because of voltage increase or begin rpm. Either the rpm sensor is not connected properly for the first, or your choice of defective remote start unit or alternator not charging.
Posted on Apr 23, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Did it ever work as far as you Know? Some vehicles have a coded key and if the key is not in the ignition at the time the remote is activated it will not start. Some systems have a key hidden in the system and some have a bypass. It is hard for me to tell you which you have as not being the installer. You may have to contact Avital or go to thier web site for more detailed info.
Posted on Jan 28, 2009
I beleive it is a pink wire for the ignition. If you can locate where it is connected this is your ignition wire. It may have worked loose under the dash.
Posted on Jan 28, 2009
it sounds like its the bypass module. When it doesnt start the car goes into security mode and wont let it start for up to 15 minutes. I would check the bypass module to see if it still has power or has been reset, if its not something you can do, bring it to a local mobile electronics shop and they should be able to take care of it for ya.
Posted on Mar 03, 2009
Check the alarm program it shoudl be programing to turns it On every 2 hours, or if you have a temperature sensor should be programed to turns it On when is too cold.
Posted on Jan 05, 2010
Most likely you need a new Ignition switch. The small "tickler" wires on your solenoid are staying on. You can disconnect the small wire from the Solenoid and then put a test light on it. Turn the Ignition to Start and see if the wire stays hot when you release the key.
Another problem you could have is the Starter has such a bad intermittent short in it, that it keeps the points welded together after the key is released from the Start position. You can get a starter Draw test done at some parts stores like Autozone or Oreillys to name a few, they do it free and on the truck.
Let me know the result please,
Posted on Oct 28, 2010
Tips for a great answer:
May 17, 2015 | 5303L 2Way LCD Remote Start Security...
Jan 17, 2015 | 5303L 2Way LCD Remote Start Security...
Aug 20, 2014 | 5303L 2Way LCD Remote Start Security...
Feb 03, 2014 | 5303L Security/Remote Start System
Feb 03, 2014 | 5303L 2Way LCD Remote Start Security...
Dec 29, 2013 | 5303L 2Way LCD Remote Start Security...
Sep 25, 2013 | 5303L 2Way LCD Remote Start Security...
Mar 03, 2013 | 5303L 2Way LCD Remote Start Security...
Feb 21, 2011 | 5303L Security/Remote Start System
Feb 04, 2011 | 477L Ask RXTX HHU Remote
22 people viewed this question
Usually answered in minutes!