How to just spin clothes in Haas automatic machine

That error doesn't appear to exist. Contact Haas direct.

https://www.google.com/search?q=Haas+washing+machine+EC+error&

..

That's is how they are designed. They just tumble clothes thru minimum amount of water. That's how they are low water use and high efficiency. They rinse the same way. Then they fully spin on spin mode. So your machine is working properly as designed.

Hi. Haas deluxe top load washing machine we got EU error code so what i need to do

E 4 means not taking in water check water supply

Front loading washers are notorious for not spinning the water out of a small load of clothes. This is because there is not enough clothes in the washer to balance the tub during the spin cycle.

Try washing a slightly larger load with a minimum of six items or more. This is one of the downsides to front load models and no specific brand is immune to the problem.

do not put heavy cloth load as too much cloth gets stuck in the spin.

We have AFTRON FULLY AUTOMATIC TOP LOADING WASHING MACHINE BOUGHT IN 2002 FROM DOHA QATAR. WE COULD HARDLY, USE IT FOR A COUPLE OF TIMES IN INDIA. ALL OF A SUDDEN THERE WAS SMOKE COMING OUT OF THE MACHINE AND FINALLY, WE FOUND THAT THE CIRCUIT HAS GOT BURNT ON THE PCB. NO BODY KNOWS THE SOLUTION IN INDIA.
I WENT TO AFTRON'S H.Q. IN UAE BUT INVANE.

PLS. ADVISE US.
RGDS.,

Change the brushes or start capacitor for the motor depending on which it takes.. The clothes are proberbly wet due to the motor not spinning the water out of them

Dear dgloss1856, Sun 4-12-2009 1:14PM EST USA

Washers will shut down automatically without completing the spin cycle for two reasons.
1) Too many clothes in the washer at once (overloading with clothes) !
2) Too much soap in the washer when washing!

When this happens you should restart the machine in the spin cycle or if you can't start in spin run a full cycle without adding soap.

If this doesn't solve the problem you may need to clean the timer or control circuits depending on your machine by cleaning with electronic spray cleaner (available at Radio Shack) by spraying the timer or control circuits as instructed on the can of electronic cleaner.

Let me know if I can be of further assistance!