Why does my red message waiting keep blinking all of the time. No message.

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

You're probably subscribed to a voicemail system offered by your telephone company, and the phone is telling you there are messages waiting. Please contact your telephone company for instructions on accessing their voicemail system.

The light may be a "new call indication" or "message waiting" indication if you have voicemail service from the phone company. If you clear the caller id log or clear the voice message the light should go out. BUT, it will keep coming back on when a new call arrives! I have a similar phone and I just put a piece of tape that matches the color of the phone over the light.

That is the message waiting indicator, it is telling you that your Call Notes (Or whatever your service provider calls it's voicemail) has a message waiting. If you do not have a message waiting, you can turn the light of by following these steps:

Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes and
appears in the handset display. In the event your message waiting light gets out of sync with your phone company’s
voice messaging system, you can manually reset it back to the “No messages waiting” state.
Press and hold FIND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
A beep sounds and the message alert tone is reset.

Battery icon goes yellow when charge is low, red when about to go off, yes, that's OK. Recommend give it more time after all the bars are full-white, to trickle more into the battery. Lithium batteries don't seem to like being flattenend and left flat in my experience.

The light blinks for all sorts of things, might also have pending messages, etc. Can use the Storm OK while it's charging, just hold down red button to turn it on again.

After turning on, sometimes the cellular receiver does not turn on until battery is more charged. Wait 10 mins and then try to make a phone call, you may get a message saying it's off, do you want to turn the receiver on - just say yes.

That should keep you going. Nice phone.

The term we used for this back when I worked for the phone company was a "stuck message waiting indicator" and the way to fix it was:

Call yourself and leave a message.
Hang up and wait 2 minutes (we used to say 5 minutes, but 2 is plenty)
Retreive/delete your voice mail message
Hang up and wait 2 minutes


That should clear the blinking light.

New phone/cable provider corrected the problem on their end. Evreything works at this time.

Hi
1>There should be a red blinking light because you have a text message waiting
2>Deleate messages from your inbox cauz it is full
3>Next time you'll see it saving the messages

On certain models the blinking red light means you have a message. On others it is because you don't have service.

If yours has service and it is not blinking I would wait to see if it starts blinking when you get an email or message of some type.

Replace the bulb.