I need a diagram on how to put the chuck back together on my turbo file II nail manicure and pedicure chuck

Question edited for a little bit of clarity.
Question moved from Computers and Internet.

Not sure about the 'hand pieces o Lu cabe', but spares are here and a link to the maker.

https://www.google.com/search?q=pedinova+replacement+parts

..

https://www.cms.gov/Outreach-and-Education/Medicare-Learning-Network-MLN/MLNProducts/Downloads/MedicareCard-FactSheet-TextOnly-909365.pdf

Morning Henry,

I've just had a look at the Stanley site. By the look of it, this tool is a disposable unit as they don't show any parts charts. Also,given that Amazon sell this for under $30.00, I'd bite the bullet and get a new one?

Regards
Alex Bostitchtools co uk Bostitch Nailers Staplers Fasteners Coil Nails Staples

Where can I find an adapter MAN-200 FIR pedicure manicure deluxe ball spa.

You put it back together wrong, as I state the obvious. Most likely the large aluminium barrEl is backward, small end should face forward, flange towards handle.
Or the collar with the two wheels that engages the Collett lock is upside down.

Hope this will help. If you still need it, this post is quite old.

Mike in Victoria

Susan Sylvia is exactly right. I just fixed my tool with her information. I would add to be very careful not to disturb the 2 small springs(associated with the trigger and safety mechanisms) and take note of how they are positioned. Also, the screws seem to strip unusually easily so be gentle when removing and replacing them.

I too have experienced the same problem with the OPI and have since spoken with others who say the same. Try the Gelish brand. I have it and it seems to stay on better than the others. The best, however, is Creative Nail Designs, but the price reflects the better quality. In the meantime, however, be sure your nails are good and dry before you start and that your cuticles are trimmed back. Make every effort to keep the gel from getting on your cuticles or the skin on the sides of your nail bed. This seems to cause lifting to begin. Also, put on thin coats of base coat, gel and top coat. I usually use two coats of gel color but both are very thin. Lastly, if you do accidentally get some gel somewhere other than the nail itself, wait until it sets and gently trim it away and then file the edge with a 220 file. This should help with your lifting problem. Good luck!

its not necessary for u