@steve: Your comment is anything but helpful. If you do not have an answer to the question, move on.
Dear Flippin-
Return the chair to OfficeMax. They should be able to either refund your money or exchange it for a similar chair.
SOURCE: Hi, I am looking for contact information for
If the place truly doesn't exist anymore, here is one the UK's largest bulb retailers.
This is one of the few places left with that name;
Paget Trading AG Dorfstrasse 11, 6300 Zug, Switzerland +41 41 710 83 13
SOURCE: Ordered Fuego Multi-Function Task office
step 1: press the 5 casters into the holes on the star base (it's a firm press until they snap into place) turn it over so the wheels are on the ground and push the gas cylinder into center hole. place black sleeves over it. set it aside.
step 2: attach armrests to seat base using bolts (I) and washers (K) (the longer and thinner bolts and smaller washers) using the allen wrench supplied.
step 3: attach the seat plate (the thing with the 3 handles) onto the bottom of the seat cushion using bolts (J) and washers (L) ( the fatter and shorter bolts and larger washers) usint the same allen wrench.
step 4: place the set onto the base into the big hole that acceps it. then sit on it to ensure it stays, otherwise when you pick up the chair it will come off the base.
step 5: slide the seat back bar into the groove where the know shows at the back of the seat. you may have to loosen that knob first. when it is in, press the little black plastic button (M) into the hole at the bottom of that seat bar to keep it from sliding out when you pull it up to adjust.
step 6: play with the levers to learn how to do different adjustments.
step 7: congratulate yourself and be proud that you did it!
Oh, make sure all the bolts are tight before putting into use.
233 views
Usually answered in minutes!
×