I have a Toro Z master model 387002x92a need wiring diagramthat i can download and print

it says in your owners manual. or go to toro.com

Don't worry I'm sure you will get the solution of your problem, just check the link I attach-

Best Manuals

I have found these timers to be the most difficult for a homeowner to master. I suggest going to Toro's web site and downloading the operating instructions.

There is a master parts viewing section on the toro website Which should have what you're looking for. However You will need to have the model number of your machine (under the seat)

try toros web site you should be able to type in model number and it may show you a diagram or a book you could buy

hi there pauly 46 here

hi peg ed

here is web site to download service manual
http://www.kohlerplus.com/main_frame.asp

enter as guest

select kohler courage single, then scroll down to service manual , then select SM 20-690-01
(replaces tp-2548 a) and download a copy to your hard drive its 6.05 Mb

here is web site for toro manual
https://homeownersolutions.toro.com/portal/server.pt/community/product_center/225#productDetailsPage

under manuals , enter 74327 as model , time cutter z420 will come up in a list of 2

see if this will let you print anything

cheers

Go to this page, pick the model you have and you will get a chance to download a manual for your mower.

https://homeownersolutions.toro.com/portal/server.pt/gateway/PTARGS_0_30166_459_225_0_43/http%3B/ptremote%3B80/solutioncenter/productNameListAction.do?count=4




There are quite a few z-400 master series models, of different sizes and probably different engines, etc.

Good Luck.

How does one connect the Wired Toro Rain Sensor, Model 53769 to the Orbit, Model #57979?

simple go to outdoorpowerequipment.com and enter make and model and you can download or print it in pdf form

heres a link

https://lookup3.toro.com/request/request.cfm?lang=ca_en

you can download and print for free or purchase one from them....you will need your serial #