Pioneer SX-P720 circuit diagramn and wiring diagram wanted please i really need it for pioneer GR-Z460

To connect a Kenwood GE 7030 equalizer to a Pioneer SX-217 receiver, you will need to use the tape record out and in jacks on the back of the receiver. Here is a general outline of the steps you can follow to set up the connection:

Locate the tape record out and in jacks on the back of the receiver. These are typically labeled "TAPE MONITOR OUT" and "TAPE MONITOR IN."

Locate the tape in and out jacks on the back of the equalizer. These are typically labeled "TAPE IN" and "TAPE OUT."

Use a pair of RCA cables to connect the tape out jack on the receiver to the tape in jack on the equalizer.

Use another pair of RCA cables to connect the tape out jack on the equalizer to the tape in jack on the receiver.

Turn on the equalizer and set the volume and tone controls to your desired settings.

Turn on the receiver and select the tape monitor function. You should now be able to hear sound through the speakers.

If you are still having trouble getting the equalizer to work, it is possible that there is an issue with the cables or with one of the components. You may want to try using different cables or checking for any visible signs of damage on the components. If you are still having trouble, it may be helpful to consult the user manual for the receiver or the equalizer or to seek the assistance of a professional audio technician.

Connect equalizer to preamp outputs and inputs on receiver. If none, use tape monitor input/outputs to set up equalizer.

Yes, connect to TAPE PLAY.
Then you come out of EQUALIZER OUT to your sound system.
There are other ways to do this, but it all depends on the rest of your system.
DOWNLOAD THE MANUAL FROM THE NET.
Peace-

Yes, the SX20 includes a preamp including a phono stage. (nice!) There is already equalization in the SX20 available via the bass/treble controls. To hoop up an external graphic equalizer, you should be able to connect it to the 'Recorder' IN/OUT and then select the tape monitor input to hear the equalized signal.

http://www.hifimarket.cz/files/img/zbozi/pioneer/_640x480/sx-20-4.jpg

Hook the eq up to tape in and out

Looking for SX2300 manual.

You can get full schematic about your device using this link:

http://elektrotanya.com/pioneer_sx-p720_920_sm.pdf/download.html

Good luck, good work!
Thanks.
gylacz

http://www.vinylengine.com/library/pioneer/pl-514.shtml
http://www.hifiengine.com/manuals/pioneer/sx-550.shtml
The upper link is for the turntable, the lower is for the receiver. they want you to create an account tu dowlnload so just create an account with them. In my expierience turntables had hook upeads out the back(wires connected) that would hook to phono in on receiver and speakers would hook to receiver via speaker wires(may not be included) by pos and neg. The speaker wire usually either has a rib or a line or writing on on leg so you can identify which wire you would want to be pos or neg.

Pioneer EQ-6500 9-Band Car Equalizer .i want to buy this equaliser.i need 10 pieces ,please send me through my email [email protected]

tape out from reciever to line in on the eq --then line out from the eq to tape in on the reciever --whenever the tape monitor will be used on the reciever the sound will then be equalized