How to Fix Kodak Printhead Error Code 3513?

That means print head missing or not installed, take out the cartridges & check all ink pads on them are clean of residue or if new cartridge has had the new tape removed, also the the printhead area is clean & reinstall them, hope this helps, if not follow the added Kodak link below

Error: "Printhead Failure" (105-3802) - Kodak

support.en.kodak.com/.../error%3A-printhead-failure-(105-3802)

KodakAug 25, 2010 - How do I resolve the error message "Printhead Failure" (error code ...If you are not prompted to calibrate the printhead, turn off the printer, wait ...

Error: "Printhead is missing, not installed correctly, or has ...

support.en.kodak.com/.../error%3A-printhead-is-missing,-not-inst...

KodakAug 25, 2010 - How do I resolve the error message "Printhead is missing, not installed correctly, or has come loose" (error code 105-3513) on my ESP or HERO All-in-OnePrinter? ... If the printhead and ink cartridges are not installed in the printer, install them: ... If the error continues, restart the printer and try to print.

Try this link. Hope it helps.

Hello Dave,
The error that you are showing means Error: "Printhead is missing, not installed correctly, or has come loose" (105-3513) Please use the following link to help you trouble-shoot and fix this error:
Error Printhead is missing not installed correctly or has come loose 105...

It appears that your printhead is loose or missing. Inspect it, clean, and reinstall. Hopefully that should clear the problem.

Kodak esp c315 .i have the kodak esp c315 and keep getting the printhead loose missing or not installed correctl

try to clean contacts and reinstall also

Follow the steps on this tutorial to reseat the printhead.......

http://www.kodak.com/global/en/service/tutorials/AiOPrinters/ESP/printHead/01_PrintHead/index.jhtml



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Try cleaning the metal contacts on the cartridge and inside the printer that the cartridge touches with some rubbing alcohol and a Qtip. Let it dry before trying again. Make sure that it is seated correctly.
Hope this was of some help,let me know. Thanks for using FixYa

Hi. Error means your printer failed to communicate with the printhead. If issue is not resolved by turning the printer off/on then you need to buy a new printhead. Here's a link on how to install a new printhead.