What does the indicator code "P" stand for - Televison & Video

codes are OBDll and are availble on line free
google error code P2108 Diagnostic trouble code (DTC) P2108 stands for "Throttle Actuator Control Module Performance

P2172 Diagnostic trouble code (DTC) P2108 stands for "Throttle Actuator Control Module Performance

P2106 The P2106 OBD-II trouble code is one of number of possible codes that indicates that the Powertrain Control Module (PCM) has detected a malfunction and is limiting the operation of the Throttle Actuator Control System

Read more at: https://www.obd-codes.com/p2106
Copyright OBD-Codes.com

FC stands for "Fan Control" and FE stands for "Fan Error". These codes indicate that there is a problem with the fan control system or the fan itself. You will need to contact a qualified technician to diagnose and repair the problem.

Local technician said I'd likely have to replace the control panel - but I don't think that is the problem. Mouse Pads Choosing The Best Pad For Your Computing Needs AmanStino

your not reading the error codes right, the F simply stands for fault then the other lights indicate a number code like f2 f4 or f5 etc Whirlpool Cabrio Washer Error Codes Repair Help Washing Machine Diagnostic Test Error Codes Cabrio Bravo Kenmore Oasis

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Indicates problem with the temperature probe. Look in the tank where the float is and check to see if it is covered with debris. The float has a magnet that collects metal particles. The metal probe that is under the float is the temp. probe.

hello,


All error codes start with the letter "E". An error code of E11 will have the five indicator lights flash once and the Start indicator light flash once.


Some models of Frigidaire washers come with a digital readout display that informs the operator of the unit's function and any errors.

Error codes indicate that a problem has occurred and should be addressed. Different models of Frigidaire washers may vary in their fault displays.

Some washer models use flashing lights at the unit's start, door lock, wash, rinse, final spin and control indicators to display error codes.



If the five indica

tor lights flash more than nine times, this signals a letter in the error code. The letter "A" stands for 10 flashes, "B" for 11, "C" for 12, "D" for 13, "E" for 14 and "F" for 15 flashes. An error code of EB2 will have the five indicator lights flash or blink 11 times, and the Start indicator light blink twice

hope this help?

thanks.

This stands for "Check engine" and indicate that the computer has registered a trouble code......what that is, is anybody's guess....but if you take it to an auto parts store, they can normally retrieve the code for free, and this will give you an indication of what might be wrong....i hope this helps

E stands for error. Have the vehicle scanned for transmission codes.

My book that i have with my tv says it is time to have it servicedby adealer sorry thats all it says