The display on my camera is in german, can I change it to English, if so, how?

SOURCE: High School Musical game - language

I got this from the disney.com/videogames web-site. It works.
1. Put in game and turn on.
2. At Menu tap the bottom listing (Op...)
3. Tap the top listing until English appears. It goes through a bunch of languages.
4. Then hit the arrow on lower left of screen and you are all set.

SOURCE: change language of my o2 comet from german to english

Hi
i have the same problem. Have you the solution?
Regards

SOURCE: Xerox Phaser 8560 - Changing Menu from German to English Language

To select the default language on the Control Panel:

1. Press the [Up] or [Down] arrow button on the Control Panel to select [Printer Setup] on the Display Screen, and then press the [OK] button.
2. Press the [Up] or [Down] arrow button to select [Control Panel Setup], and then press the [OK] button.
3. Press the [Up] or [Down] arrow button to select [Language], and then press the [OK] button.
4. Press the [Up] or [Down] arrow button to select the required language, and then press the [OK] button.
5. Press the [Back] button, located to the left of the 'Up' and 'Down' buttons, three times to return to the Main Menu.

1. Open an Internet web browser on the workstation.
2. Enter the IP Address of the printer in the Address field, and then press [Enter] on the keyboard. The CentreWare Internet Services window will be displayed.
3. Click on [Properties]. The Properties window will be displayed
4. Click on the [General] folder on the left, and then select [Printer Defaults].
5. Under the User Preferences section, select the language from the Set Control Panel Language pull-down.
6. Click on the [Save Changes] button.
7. Click on the [X] in the upper, right corner to close

SOURCE: I want to change the language on my navman from German to english

First of all the language was Finnish and not German. I managed to get a translation from Finnish to english for the word  kieli (Language).  Then i went to the system menu and selected kieli, then englanninkieli then pressed enter, this changed the language to english. I did not have to do a factory reset. Thank you for your trouble.
Regards Noel

SOURCE: Need to change language from german to english.

If you are talking about one of the Casio QT6xxx's then you need to.

I . All peripheral devices and terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.
*In case of wire inline:
3. Connect all terminals by inline.
*In case of wireless inline: QT 6000 or QT6600 models
3. Connect Wireless LAN card.
Operation:
4. Turn on all peripheral devices of a terminal.
5. Turn on this terminal while pressing and holding the initialize switch and then release.
6. Next the screen will say push the INIT (initialize) switch to start IPL.
After releasing the key
The IPL will take a few minutes to copy over.

When it is done, Pick the Language you need. enter"20000" (U.S.)," l0000" (other area:English)," 40000"
(other area:German)," 50000" (other area: French)," 60000" (other area: Spanish) and
press the <OK> key.

I will be making a video of this procedure this week, so visit us @ www.casiohelp.com to view it.