Uniden d3097-5. phones have terrible feed back and keep cutting out

I'm having the same problem as you are. My screen went blank for no apparent reason. I've been searching for a quick fix solution but I keep comming across asinine answers that has nothing to do with the original problem such as this one. If you find a solution before I do, can you please post it? Thanks in advance!

This kind of problem points to dead or weak batteries.

Unplug your phone line and power cord from the back of phone. Wait a few seconds and plug back in. Try your phone. It shoud be working. If 1 one of your batteries got so low that the phone cut off the rest of your phones did too. I don't know why, I just know this is not the first I hear of this issue with the newer Uniden cordless phones. Hope this helps you. Good luck!

You can program the length of the message. The choices are 1 minute and 4 minutes. Keep in mind that the total duration of the message memory is about 14 minutes.

My Uniden phone system CXA15198 -one base phone and one cordless was cutting off the conversation. I unplugged the phones for about an hour and since then they've worked fine. Next time it happans I'll get a new battery for the cordless phone.

For starters that dsl modem should not be filtered.
You should place the splitter directly into the wall jack and place the filter on the side used for the phone. The side feeding the dsl line should not be filtered.
The filter serves 2 purposes. 1 it reduces data noise interference onto the voice line. 2 it prevents dsl interference from voice such as picking up and hanging up the receiver.

i have a uniden 5.8 ghz cordeless and thought it was a piece of junk as well. I had static or lapse of audio near the router, the kitchen sink, the microwave (even when off) and in the doorway. I switched the frequency on the router and changed the channels on the phones all with no luck. Short of steering clear of my entire downstairs nothing worked.

Just about ready to buy a new phone and hit up google. Saw a posting that said to keep the base away from even the tv. . .hmmm this is exactly where mine was located. So I swapped the digital answering machine base and moved it downstairs and put the additional base near my flat screen. Guess what? Problem SOLVED! I still cannot believe it.

Hope this helps

Easiest way take off back plate un hook battery wait a couple of minutes hook battery back up phone should find reciever on diff. channel

Took them Back to the shop - Uniden said there was a bad batch made....
If you have any other/better suggestions let me know.
Have Fun.

I had this same problem. Unidens troubleshooting was terrible. I finally figured out what the problem was though. In the address book on the phone it only holds 100 phone numbers. If it is full, and someone calls it will not store the number. Erase some of the entries and see if it will work then. It needs a certain amount of space to hold the number. Hope this fix will work.