I have old Samsung SyncMaster 920NW monitor, I have a problem and one confusion regarding this. Now on this monitor I can't see white lines e.g. on google map, I can't see white line or anything which have white line like these, I can't see, but I can see it on other display on same PC. Confusion: This LCD is old now,I have blue light filter eye glasses, do latest LEDs have improvements in comforting eyes? will it better for my eyes to replace it with new LED ?

SOURCE: Samsung LCD Monitor SyncMaster 203B

Hi this is the way how to examine what's wrong with your LCD monitors. After you turned it on and the screen blacked out or stopped working, you have to check that if you can see the image on the screen or not by shining a flashlight into the screen, not directly but find the best angle to the screen and take a look very closely. If you can see the icons or any image, there will be a minor problem. This is because of the lamps inside screen. Some of them were broken and it is very easy to replace. If you cannot see anything on the screen, there'll be some problems with inverter board. If you have soldering tool and want to fix it by yourself, check the caps first. It may cause this problem. Some caps might show leaking or burn spot on the board because of too high temp. If you don't have soldering tool, you better go get a technician to do so. Hope this help!! If anything I can help you with, feel free to let me know.
Thank you,

SOURCE: Samsung 191T Blank

You need a fluorescent back light and inverter kit. Available on eBay.

SOURCE: No display on SyncMaster 920NW after reboot from power failure

Hello,

It sounds like you have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of the monitor. If you are good at electronics repair/soldering you can usually fix the problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htm You can take the back cover off your monitor and look for the bad parts,replace any that look like the pictures and your monitor should work fine. The capacitors do need to be installed with the correct + and - connections, note the stripe on the old one and insert the new one the same way. Look in our monitor repair section for step by step repair guide for this model it should be the same power supply as the 930. If you don't want to try the repair yourself we offer a repair service for $35 plus shipping.

I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of computer and printer support/repair

SOURCE: Hi I Got a Samsung SyncMaster 920NW the display

If you are saying that it powers off in a few seconds you most probably have a bad (internal) power supply.

SOURCE: Samsung SyncMaster 920nw suddenly went black now squeaks/flickers

The 920nw did have a 3 year warranty on the unit but they will be out of warranty now. The flickering power light is an indication of a failure in the power supply board. When the board fails it can't start up correctly and the power shuts down over and over so you get the blinking light and no display. This is a very common failure point on all LCD monitors after a few years of use. There are parts called capacitors on the power supply board and they filter the output power. When they fail the power is not properly regulated and the power supply shuts down and tried to restart so you get the flashing. Here is a link to a repair guide that will show you how to dis-assemble the unit and then what to look for and replace to get it back up and running again.

http://www.ccl-la.com/blog/index.php/repairing-the-samsung-920n-920nw-monitors/

The repair guide has pictures and videos to guide you through the repair.
I hope this helps, if so please rate my solution.

BuddyMc