Question about Frigidaire Kitchen Ranges
Is this the correct size for Propane, or Natural Gas?
The gas orifices for propane are different than LP gas. Are you trying to blow yourself up?
Posted on Mar 09, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Generally you can drill the orifice out 7 drill sizes larger for the lp to naturall gas conversion... Start with 1 orifice and if you like the size flame repete as needed... cost.... free if you have a drill index!!
Posted on Sep 04, 2008
In most cases the orifices can be removed and reversed to convert from lp to natural gas. Sometimes you will need a conversion kit and you will need to look this up by model number. 465 is the oven capacity not the model number. You can locate the model number by pulling the drawer out and looking behind it. Please let me know the model and I can let you know what kit you need. Also I should let you know that your gas company is the most qualified to convert your range, and this conversion should not be attempted by anyone who is not qualified. If this conversion is not completed properly you could be risking your life and the lives of everyone in your home, so make sure you know what you are doing!! Or get a qualified person. Good luck and please be careful making any changes to your gas appliances. Please dont forget to rate me also.
Posted on Oct 28, 2008
your going back to natural from LP??? of so tyhere is no new orifice , but hte "hood" on the end of the bake, needs to be adjusted out"loosened", LP the "hood" is secured snugged down,
Posted on Jan 11, 2009
The kit is located at the rear of the range right near the gas valve, there are probably 5 spuds and an extender for the large burner, directions are with the range. For the bake and broil you will need to tighten the brass orifice nuts down as tight as possible, also the brass nut on the gas valve needs to be reversed
your local LP dealer should be able to do this for you if you are uncomfortable doing it yourself.
Posted on Jan 27, 2009
I needed parts for my GE XL44 propane converted stove. This site was very helpful. I found the part and there is online live help or toll free help. Go to: AppliancePartsPros.com
Posted on Jan 29, 2009
Tips for a great answer:
Apr 06, 2018 | Kitchen Ranges
Dec 21, 2013 | Premier 24 inch Compact Gas Range w/ Solid...
Apr 21, 2013 | Kitchen Ranges
Sep 20, 2011 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...
Feb 03, 2011 | Frigidaire Gallery GLEFM397DS Electric...
Sep 29, 2009 | Frigidaire Gallery GLEFM397DS Electric...
Sep 21, 2009 | Frigidaire FGB24S5A Gas Single Oven
Jul 13, 2009 | Frigidaire 30 in. Electric Gallery Series...
Dec 05, 2008 | Frigidaire 30" Self-Cleaning Freestanding...
Nov 01, 2008 | Frigidaire FGB24S5A Gas Single Oven
59 people viewed this question
Usually answered in minutes!