Phoenix digital pd-7.2 in lcd monitor user manual, because we were given the monitor, but we know nothing about it. Help! it was in a box with a bunch of security cameras

its the older mouse plug

The Phoenix User Manual is available in electronic format from either of the two locations below:

• When Phoenix is not running from your Start Menu > Programs > PhoenixRC > User Manual folder
• From within Phoenix by clicking the Help > User Manual item on the Main Menu Bar

There are also many small green "?" help buttons on the top-right of the program menus. Clicking these will take you to the User Manual at the correct section for help on this item.

go to rockfosgate.com they have the specs on how to make a box. on their homepage, go to support, then click on woofer box wizard. that should help you. good luck.

Hi, Anita.

Here's a link to Softpedia's Sampo Driver pack:

http://drivers.softpedia.com/get/MONITOR/SAMPO/Sampo-LCD-Driver-Pack.shtml

Select the smaller icon "Download".

Hope this helps.

Post a screenshot. If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Do have the 3M driver? If not you can go to their web sight and down load it. You'll need to know what touch card you have, Microtouch or Dynapro. The monitor will be marked hopefully or you could call tech support. Just google 3m touch screen drivers.

http://www.devicemanuals.com/guide/LCD/Acer/Acer-P193W-LCD-Monitor-User-Guide-English-==TVRBMk56azM=.html

Go to the above given link and download user manual

T.Boopathy

First of all did the set get wet? If so, It needs the boards washed Immediately! Spray boards with windex soak em up. Need to remove all salt deposits and minerals or the boards traces will rot.Then rinse with distilled water let dry Then you could save this set. check this site They rebuild assorted stuff cheap. www.irionstvshop.com

Protron Digital Corportation
2133 S. Green Privado Ontario CA 91761
1-888-257-8899

Hi Coleman,

Nothing really special needed unless you get it running and you have lines or snow on the screen. You can use a the PS2's A/V cable, just run it on the opposite side of the car from the power. Also, you will probably need more length than the average PS2 A/V cable has, so Splice in some length. As far as mounting, Most of the time, I fashion an adapter to connect into the bracing for the dome lamp. You might get lucky and find a Bracket made for the Expedition. If you do not like the postition of the Dome lamp, thge roof of the expedition should have ribs. You can make some cross beams to span betweent he Ribs and allow for mounting your Monitor.