How to set my time waco model BND 50 - Car Audio & Video

cannot find exact - but this site is providing many different timers settings and will give you general idea how to set yours:

http://waterheatertimer.org/How-to-set-timers.html

do not forget to vote...

See the link for the actual user manual.
Tedelex BND 50 SAS36 pdf

There are many BND-60 timers

1) Do you mean Intermatic timer? Instead of intertek?
http://waterheatertimer.org/Intermatic-timers-and-manuals.html

2) Is this BND-60-u or BND60-b analog timer from china?
http://waterheatertimer.org/How-to-set-timers.html

3) is this BND-60 programmable timer from china?
http://waterheatertimer.org/Woods-timers-and-manuals.html#46-1022

4) Add comment and include photo of timer, or describe timer in detail for possible identification and further assistance.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Copy following link for instructions how to set analog timers by experimenting with features
http://waterheatertimer.org/How-to-set-timers.html

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

To set the clock, press and hold the BND button. While holding the BND button, press and hold the DISP button for 2 seconds. When the clock starts flashing, use the left button to set the hour and the right arrow to set the minute. When you are done, press the BND button to save the time that you set.

This is from the 225 but should be the same:

Setting the Clock
1) Press and hold the BND button 0, and then
press the DISP button 9 to display the clock
display.
2) Press and hold the BND button 0, and then
press the DISP button 9 for 2 seconds or
longer.
3) Press the SRCH Up button ´, then set the
current hour.
4) Press the SRCH Down button ´, then set
the current minute.
5) Press the BND button 0, then the clock is
set.
Notes:
• If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.
• If you remove the vehicle’s battery for a check or
repair, the clock will be reset, so you must set it again

1. Press and hold the [BND] button, and then
press the [DISP] button to display the clock
display.

2. Press and hold the [BND] button, and then
press the [DISP] button for 2 seconds or
longer.

3. Press the [a] or [d] button to toggle
HOUR and MINUTE selection. Then turn the
[ROTARY] knob clockwise to increase hour /
minute or counterclockwise to decrease hour
/ minute.
4. Press the [BND] button, then clock is set.

Note:
• If you select another operation mode while you
are setting the clock, the clock setting operation
will be canceled.
• If you remove the vehicle's battery for a check or
repair, the clock will be reset, so you must set it
again.

http://www.clarion.com/sg/en/MungoBlobs/493/1008/DB246-AS.pdf

1.Press and hold the (BND) button, then press the (DISP) button to display the clock display.
2.Press and hold the (BND) button, then press the (DISP) button for about 2 seconds (the number will flash).
3.Press the << button to toggle between hour and minute selections. Then turn the ROTARY(volume) knob to increase hour/minutes.
4.Press the (BND) button, then the clock is set!

Kurz

1. While pressing the BND button, press the DISP button to display the clock display. 2. While pressing the BND button, press and hold the DISP button for two seconds or longer. 3. Press the Left button, then set the current hour. 4. Press the Right button, then set the current minute. 5. Press the BND button, then the clock is set. You can download a user's manual from this link: http://www.clarion.com/us/en/MungoBlobs/615/523/DRX5575(Manual).pdf