I have a Janome Memory Craft 11000 Special Edition. I moved the feed dogs down for free style sewing now they will not move back up. What can I do?

Perhaps this will help:

What causes thread eyelashes when sewing

Thread HELP eyelashes


http://www.generations-quilt-patterns.com/sewing-machine-tension-troubleshooting.html

you may have the fabric not tight enough in the hoop or try using the same colour thread in the bobbin

Memory Craft 11000

Version 2.10 update is available for owners of MC11000 Version 2.01 and MC11000 Special Edition. Version 3.10 update is available for owners of MC11000 Version 3.00 and MC11000SE Version 3.00 with the purchased Professional Quilting Kit Version 3.00. This is not the update program for the owner of MC11000 Version 1.31 or earlier.

How can I get an instruction manual for my Janome My Style 20. Serial No:653008110.
Cheers
Kym.

screen is digital? may need new battery for screen power

Thanks to floraq803, we have our 11000 working again. The needle threader was stuck in the down position. We turned off the machine, and turned the wheel (which controls where the needle is) until the needle threader bar was straight (approximately 1/2 way between the needle being all the way down and all the way up). Turned on the machine and the threader came back up again. Now back to sewing.

if the button will move but the feed dogs don't then the feed dogs need to be check, at a repair shop,

on the backside of your free arm there is a small lever which can be moved to lower the feed dogs.
When you want them back up move the lever the other way.NOTE!!
They will not go up until the machine has made one revolution.
sewman7

The feed dog will rise as soon as you turn the handwheel one time. Just put the fabric in it and sew. It will come up automatically as long as you have moved the lever to the correct position.
sewman7