How many qt oil does a mz5424s 24 hp husqvarna take to change the oil

Dry fill: 7.5 L (7.9 US qt, 6.6 Imp. qt)
With oil filter change: 7.0 L (7.4 US qt, 6.2 Imp. qt)
Without oil filter change: 6.4 L (6.8 US qt, 5.6 Imp. qt)

hhListed below are engine crankcase dil fill quantities: • Saran-Built Engines OEM Dipstick Tube Crankcase Oil Engine Model Option Code(s) Capacity CD3029DF 4001,4002 6.0 L (6.S qt) CD3029DF 4003,4022 6.0 L (6.S qt) CD3029TF 4001,4003,4023 8.0 L (8.S qt) CD3029TF 4002 6.0 L (6.S qt) CD3029TF 4021 8.S L (9.0 qt) CD4039DF 4001,4002,400S 8.S L (9.0 qt) CD4039DF,TF 4003 12.0 L (12.S qt) CD4039DF 4004' 9.0 L (9.S qt) CD4039DF 4004 14.S L (1S.S qt) CD4039DF 4006,4010,4019 8.S L (9.0 qt) CD4039DF 4011 13.0 L (14.0 ql) CD4039TF 4002 13.S L (14.S qt) CD4039TF 4004,4013 14.S L (1S.S qt) CD4039TF 400S,4006,4020 12.S L (13.0 qt) CD4039TF 4007 13.0 L (14.0 ql) CD4039TF 4008,4012 11 .S L (12.0 qt) CD404SDF,TF 4003 12.0 L (12.S qt) CD404SDF 4004 9.0 L (9.S qt) CD404STF 4007 1S.0 L (16.0 qt) CD404STF 4020 12.S L (13.0 qt) CD60S9DF,TF 4001,4004 17.0 L (18.0 ql) CD60S9DF,TF 4010,4012 17.0 L (18.0 qt) CD60S9DF 400S 14.0 L (1S.0 qt) CD60S9DF,TF 4006,4008 20.0 L (21.0 qt) CD60S9DF,TF 4007,4011,401S 1S.0 L (16.0 ql) CD60S9TF 4009 14.0 L (1S.0 qt) CD6068DF,TF 4010 17.0 L (18.0 ql) • For engine base code 1476F only Crankcase oil capacity may val}' slightly from amount shown. ALWAYS fill crankcase to full mark or within crosshatch on dipstick, whichever is present. DO NOT overfifl. 96 • Dubuque-Built Engines OEM Dipstick Tube Engine Model Option Code(s) T04039DF 4001 T04039DF 4002 T04039DF,TF 4004 T04039DF,TF 4006 T04039DF 4007 T04039DF 4012 T04039DF,TF 4013,4014 T04039TF 4001 T04039TF 4007 T0404SDF 4001,4002 T0404SDF 4003 T0404SDF,TF 4004 T0404STF 400S T060S9DF,TF 4001 T060S9DF 4002 T060S9DF,TF 4004 T060S9DF,TF 400S T060S9TF 4007 T06068DF,TF 4001 T06068DF,TF 4004 T06068DF 400S Crankcase Oil Capacity 9.S L (10.0 qt) 9.0 L (9.S qt) 13.S L (14.S qt) 13.0 L (14.0 qt) 8.S L (9.0 qt) 13.0 L (14.0 qt) 11.S L (12.0 qt) 13.0 L (14.0 qt) 12.S L (13.0 qt) 9.0 L (9.S qt) 13.0 L (14.0 qt) 13.S L (14.S qt) 13.0 L (14.0 qt) 19.5 L (21 .0 qt) 11 .S L (12.0 qt) 19.0 L (20.0 qt) 24.S L (26.0 qt) 17.0 L (18.0 qt) 19.0 L (20.0 qt) 19.0 L (20.0 qt) 24.S L (26.

Gehl 553 Specifications Forkliftaction com

https://www.deere.com/en_INT/docs/product/equipment/industrial_engines/tier_3_stage_3_a/tier_3_stage_3_a_pocket.pdf

This is not resettable. The unit will reset after about 4-6 hours of use.

Most have a switch in the seat, when you leaned over it activated the switch. The switch may be broken and needs to be replaced or the wires are unplugged or have a poor connection

1.6 gal

they hold 3 litres with new filter

EVERY motorcycle I've owned had .."cast" into the case near the oil fill the fill amount..in this case
1.8 qt. or for our metric buddies 1.7 litres ... MAKE SURE you use oil intended for motorcycles with wet clutch new "auto" oil has additives that make them too slippery for wet clutches

Page 8 of your manual says 40:1 (3.2oz/1gal) Stihl or Husqvarna 2 cycle oil.
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – for use with IPL
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week

Fuel/Oil Mixture

1. Use a quality 2 cycle oil and mix it to the OIL supplier's recommended ratio. Today I use Stihl 2 cycle oil mixed @ 50:1 in a Pioneer that I purchased new in 1980. There are no gouges or scratches on the piston or cylinder and I have no carbon build up on the piston top. The manual (on stone tablets) recommends 24:1. Over the years the mixture has leaned from 24:1 (Saw Recommendation) to 28:1 (Lawn boy mower recommendation) to 32:1 (Oil provider 8oz/2gal - used for many years) and finally the last 5 (±) years 50:1 (Stihl 2.6oz/1gal)
2. Any fuel containing ethanol is not good with chainsaws. Mix what you expect to use within a few months. Anything over 3 months old use up in a 4 cycle engine. HTH

Lou

Oil change only...
XR250L XR250R................................. 1.3 liters (1.37 US qt)
XR400R.............................................. 1.7 liters (1.8 US qt)

Oil & filter change...
XR250L XR250R................................. 1.4 liters (1.5 US qt)
XR400R.............................................. 1.8 liters (1.9 US qt)

After engine rebuild...
XR250R, 1986 through 1995 XR250L..... 1.6 liters (1.7 US qt)
1996 and later XR250R........................ 1.7 liters (1.8 US qt)
XR400R.............................................. 2.2 liters (2.3 US qt)

Oil change : 2.4L ~ 2.5 US qt ~ 2.1 Imp. qt
Oil change with filter change: 2.8L ~ 3.0 US qt ~ 2.5 Imp. qt
Oil capacity after engine overhaul : 3.3L ~ 3.5 US qt ~ 2.9 Imp. qt

Oil quality: SAE 10W-40 API grade SE or SF